Norgren 124670618 Pneufit Swivel Male Tee 3/8 Od

Product Description

The NORGREN 124670618 is a Pneufit swivel male tee push-to-connect tube fitting constructed from nickel-plated brass. It provides a three-way connection in pneumatic and fluid-handling lines, joining two push-to-connect tube ports with a male NPT threaded port. The fitting accepts 3/8-inch OD tubing on the tube ports and features a 1/8-inch NPTF male thread. It is rated for a maximum working pressure of 260 psi and handles temperatures from -4 degrees F to 175 degrees F. The swivel design allows the threaded port to rotate during installation, simplifying alignment in tight or awkward plumbing runs. Intended for installation by trained pneumatic, HVAC, or mechanical technicians.

This fitting is suited for general-purpose pneumatic and compressed-air systems in both residential and light commercial applications. Typical installations include instrument air lines, pneumatic actuator supply lines, and control tubing assemblies where a tee branch with a male NPT takeoff is required. The nickel-plated brass construction provides corrosion resistance suitable for dry air and non-corrosive gas service. The 3/8-inch OD tube connection accommodates common polyurethane, nylon, and polyethylene pneumatic tubing found throughout HVAC control and automation systems.

Key Features

• Push-to-connect tube ports accept 3/8-inch OD tubing without tools for fast, secure connections
• 1/8-inch NPTF male thread provides a reliable pressure-tight seal at the branch port
• Swivel male thread design allows rotation during installation to simplify alignment
• Nickel-plated brass construction resists corrosion in general-purpose air and gas service
• Rated to 260 psi maximum working pressure for demanding pneumatic circuit applications
• Wide operating temperature range of -4 degrees F to 175 degrees F covers most indoor mechanical environments

Compatibility

Designed for general-purpose pneumatic and compressed-air systems using 3/8-inch OD tubing with 1/8-inch NPTF male threaded ports, as noted in manufacturer specifications.

Installation Notes

Installation is performed by qualified pneumatic or mechanical technicians. Depressurize and isolate the air or gas line completely before removing or installing any fittings. Verify that the mating female NPT port and the tubing OD match the fitting specifications before assembly. Inspect push-to-connect tube seating by pulling back on the tubing after insertion to confirm positive retention before re-pressurizing the system.