Norgren 102250505 Push-to-connect Adapter M5x0.8 5mm

Product Description

The NORGREN 102250505 is a straight push-to-connect tube fitting adapter designed to transition between a push-to-connect tube connection and an M5 x 0.8 metric thread. Constructed from nickel-plated brass, this adapter handles a maximum working pressure of 260 psi and operates across a temperature range of 0 degrees F to 175 degrees F. The fitting accepts a 5mm outside diameter tube and features a nitrile O-ring for a reliable seal. It is used in general-purpose pneumatic and fluid line assemblies where a quick, tool-free tube insertion is required alongside a threaded port connection.

This fitting is suited for light industrial, automation, and general-purpose pneumatic plumbing applications. It is typically installed where a metric-threaded port on a valve, manifold, or component body needs to accept a push-to-connect tube line. The compact overall length of 21mm makes it appropriate in space-constrained panel or manifold assemblies. Fluid power technicians and industrial maintenance personnel are the primary installers of this type of fitting.

Key Features

• Straight adapter configuration with push-to-connect tube inlet and M5 x 0.8 metric thread outlet
• Nickel-plated brass construction for corrosion resistance in general-purpose environments
• Rated to 260 psi maximum working pressure
• Nitrile O-ring seal for dependable leak-free connection
• Wide service temperature range: 0 degrees F to 175 degrees F
• Compact 21mm overall length for use in tight installations

Compatibility

Designed for general-purpose pneumatic and fluid systems requiring a push-to-connect tube fitting with an M5 x 0.8 metric thread port connection and a 5mm outside diameter tube.

Installation Notes

Depressurize and isolate the pneumatic or fluid line completely before installing or removing this fitting. Ensure the mating port thread is clean and undamaged before threading in the adapter; hand-tighten first, then use a wrench only to the degree needed to seat the fitting without over-torquing the brass body. Insert tube fully into the push-to-connect collet until it bottoms out, then give a slight pull-back to confirm the collet has locked. To release the tube, depress the collet ring evenly while pushing the tube inward before withdrawing.