Norgren 101671248 Push-to-connect Male Bspt Fitting

Product Description

The NORGREN 101671248 is a push-to-connect tube-to-male BSPT tube fitting designed for general-purpose pneumatic and fluid line applications. It accepts a 12 mm outside diameter tube on each tube end and features a 1/2 inch BSPT male thread at the center connection. The body is nickel-plated brass, offering corrosion resistance in moderate-duty environments. The fitting is rated to 260 psi maximum working pressure and handles temperatures from 0 degrees F to 175 degrees F. An integrated nitrile O-ring provides the primary tube seal. Licensed tradespeople and service technicians install this fitting where a reliable push-to-connect interface is needed without additional tools.

This fitting is suited for general-purpose pneumatic tubing systems in industrial, commercial, and light manufacturing environments. It serves as a union-style inline connector where a male BSPT threaded port is required between two tube runs. Typical installations include compressed air distribution, pneumatic control circuits, and similar low-to-medium pressure fluid or air service lines where quick tube insertion and removal improve maintenance efficiency.

Key Features

• Push-to-connect tube ends accept 12 mm outside diameter tubing without additional tools
• 1/2 inch BSPT male thread for direct port or tee connection
• Nickel-plated brass construction for corrosion resistance and mechanical durability
• Rated to 260 psi maximum working pressure
• Operating temperature range from 0 degrees F to 175 degrees F
• Nitrile O-ring seal for reliable tube retention and leak prevention

Compatibility

Designed for general-purpose pneumatic and fluid service tubing systems requiring a 12 mm outside diameter tube connection with a 1/2 inch BSPT male threaded port.

Installation Notes

Depressurize and isolate the line completely before removing or installing any push-to-connect fitting. Ensure tube ends are cut square, deburred, and clean before insertion to achieve a proper seal. Verify that the BSPT thread engagement meets applicable installation standards and use appropriate thread sealant compatible with the media being conveyed. Inspect the nitrile O-ring for damage before installation; a compromised O-ring will cause a leak at rated pressure.