Norgren 101450428 Push-to-connect Elbow Adapter Bspt

Product Description

The NORGREN 101450428 is a push-to-connect elbow adapter tube fitting designed for quick, tool-free tube connections in pneumatic and fluid handling systems. It features a tube-to-male BSPT configuration, allowing a 4 mm outside diameter tube to connect at a 90-degree angle to a male 1/4 inch BSPT threaded port. The body is nickel-plated brass for corrosion resistance, and the fitting is rated to 260 psi maximum working pressure. An internal nitrile o-ring provides a reliable seal across a wide service temperature range. This fitting is installed by plumbers, pipefitters, and instrumentation technicians in general-purpose pneumatic lines.

This fitting is suited for general-purpose pneumatic and low-pressure fluid applications in both light industrial and commercial settings. The push-to-connect design allows fast tube insertion without additional ferrules or compression tools, making it practical for panel builds, equipment retrofits, and maintenance work. It is compatible with 4 mm outside diameter tubing and threaded into standard 1/4 inch BSPT male ports found on valves, manifolds, regulators, and actuators.

Key Features

• Push-to-connect design allows fast tube insertion and release without separate compression hardware
• 90-degree elbow configuration routes tubing in tight spaces and around obstructions
• Nickel-plated brass construction provides corrosion resistance in industrial environments
• Nitrile o-ring seal maintains pressure integrity across a wide temperature range
• Rated to 260 psi maximum working pressure for general pneumatic service
• 1/4 inch BSPT male thread for direct connection to standard metric-thread ports

Compatibility

Designed for use with 4 mm outside diameter tubing in general-purpose pneumatic and fluid systems using 1/4 inch BSPT male threaded ports.

Installation Notes

Depressurize and isolate the system completely before installing or removing any push-to-connect fitting. Thread the BSPT male end into the receiving port by hand first, then tighten with an appropriate wrench, taking care not to overtighten and crack the fitting body. Insert the tube straight and fully into the collet until it seats; to release, press the collet ring inward while pulling the tube out. Verify there are no leaks by pressurizing the system slowly after installation.