Nordic Pure 9x27x1ExactCustomM12-6 Merv 12 Filter 6 Pack

Product Description

The NORDIC PURE 9x27x1ExactCustomM12-6 is a custom-cut, pleated MERV 12 air filter designed for residential and light commercial HVAC systems including forced-air furnaces and central air conditioners. Rated at MERV 12 per ASHRAE standards, this filter captures over 90% of airborne particles in the 3-10 micron range and 80-90% of particles in the 1-3 micron range. The filter media is electrostatically charged to attract contaminants and will not promote bacterial or mold growth on the filter surface. The frame is constructed from a heavy-duty, moisture-resistant beverage board. Each order contains 6 filters with an actual size of 9 x 27 x 0.75 inches.

This filter is manufactured to exact custom dimensions and is suited for residential homes, apartments, and office environments where occupants deal with allergies, pets, or elevated dust levels. The MERV 12 rating is comparable to MPR 1500-1900 filters used by other manufacturers. It is appropriate for standard 1-inch filter slots in gas furnaces, heat pumps, and central air handlers. Nordic Pure recommends replacing this filter every 1 to 3 months, with more frequent changes recommended in homes with pets or allergy sufferers. Custom construction may incorporate frame cuts and tape joining depending on the final dimensions.

Key Features

• MERV 12 rated per ASHRAE standards, comparable to MPR 1500-1900
• Captures over 90% of particles 3-10 microns including pollen, dust, mold spores, and pet dander
• Captures 80-90% of particles 1-3 microns including bacteria and smoke
• Electrostatically charged media for enhanced particle attraction and low airflow resistance
• Heavy-duty, moisture-resistant beverage board frame with reinforced 2-part construction
• Made in the USA to exact custom dimensions

Compatibility

Custom-cut replacement filter for residential and commercial HVAC systems requiring a 9 x 27 x 1 nominal (actual size 9 x 27 x 0.75 inches) filter slot. Measure the existing filter carefully before ordering, as this is a non-returnable custom size.

Installation Notes

This filter is installed by HVAC technicians or knowledgeable homeowners servicing forced-air heating and cooling systems. Power down or set the thermostat to off before removing the old filter to prevent unfiltered air from circulating through the system. Confirm airflow direction marked on the filter frame matches the direction of air movement in the unit before securing the filter in place. Because this is a custom size, verify actual slot dimensions with a tape measure prior to ordering, as nominal and actual filter sizes frequently differ.