Nordic Pure 9x13x1CustomM8+C-6 Merv 8 Plus Carbon Filter 6pk

Product Description

The NORDIC PURE 9x13x1CustomM8+C-6 is a custom-cut, pleated MERV 8 Plus Carbon air filter sold in a 6-pack for residential and light-commercial HVAC systems. It combines a MERV 8 mechanical filtration layer with an activated carbon layer to capture airborne particles and reduce common household odors in a single filter pass. The actual filter dimensions are 8 inches by 13 inches by 0.75 inches - hand-cut to match the exact nominal size ordered. Each filter is manufactured in the USA to the specific measurements entered at the time of order, making an accurate tape-measure reading of the existing filter essential before purchasing.

This filter is suited for forced-air furnaces and central air conditioning systems that use a 1-inch filter slot with a nominal 9x13 opening. Recommended replacement interval for 1-inch filters is every 30 to 90 days depending on indoor air quality, pet presence, and local dust levels. The carbon layer is particularly useful in homes with cooking odors, pets, or light smoke. Licensed HVAC technicians and knowledgeable homeowners install this filter during routine preventive maintenance calls.

Key Features

• MERV 8 rating captures 70 to 85 percent of airborne particles between 3 and 10 microns, including dust, pollen, lint, pet dander, and mold spores
• Activated carbon layer reduces common household odors such as cooking smells and pet odors
• Reinforced 2-part frame provides added structural rigidity while supporting consistent airflow across the filter face
• Custom-cut to nominal 9x13x1 with actual dimensions of 8 inches by 13 inches by 0.75 inches
• Made in the USA to the exact dimensions specified at order
• 6 filters per pack for extended service supply

Compatibility

Designed as a custom-size OEM-style replacement for residential and light-commercial forced-air furnaces and central AC systems requiring a nominal 9x13x1 filter slot. Verify actual slot dimensions with a tape measure before ordering, as this item is non-returnable once manufactured.

Installation Notes

Power down or set the thermostat to OFF before removing the existing filter to prevent unfiltered air from circulating through the air handler during the swap. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a custom-cut size, measure the existing filter opening to the nearest 1/8 inch before ordering - do not rely solely on the size printed on the old filter. Replacement of 1-inch filters every 30 to 90 days is standard practice under normal residential operating conditions.