Nordic Pure 9x13x1CustomM10+C-6 Merv 10 Carbon Filter

Product Description

The NORDIC PURE 9x13x1CustomM10+C-6 is a custom-made pleated air filter combining MERV 10 filtration media with an activated carbon layer, designed for residential AC and forced-air furnace systems. Each filter ships as a 6-pack, cut to nominal 9x13x1 dimensions with an actual size of 8 inches by 13 inches by 0.75 inches. The carbon layer targets odors alongside standard particulate capture. These filters are hand-fabricated to the stated dimensions using Nordic Pure frames, and in some cases bonded with tape to achieve the custom size. HVAC technicians and property owners maintaining non-standard filter openings are the primary installers.

This filter is suited to residential air handlers, furnaces, and split systems with a filter rack sized to accept a 9x13x1 nominal slot. Because these are custom-cut units, they are built specifically for openings where standard stock sizes do not fit. Nordic Pure recommends replacing 1-inch filters every 30 to 90 days depending on local air quality, household dust load, pet presence, and system run time. The 6-pack quantity supports a full replacement cycle across multiple service intervals.

Key Features

• MERV 10 media captures over 85% of airborne particles in the 3 to 10 micron range, including dust, pollen, lint, pet dander, and mold spores
• Activated carbon layer reduces common household odors alongside particulate filtration
• Custom nominal size of 9x13x1 with actual dimensions of 8 inches by 13 inches by 0.75 inches for non-standard filter openings
• Reinforced 2-part frame construction engineered for balanced filtration and consistent airflow support
• Sold as a 6-pack to cover multiple replacement intervals
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential AC and furnace systems requiring a nominal 9x13x1 filter slot. Measure the actual opening before ordering, as these units are non-returnable custom fabrications.

Installation Notes

Installation is typically performed by licensed HVAC technicians or knowledgeable property maintenance personnel. Before replacing the filter, shut down the air handler or furnace at the system disconnect or thermostat to prevent unfiltered air bypass during the swap. Confirm the actual filter cavity measurement matches the 8-inch by 13-inch by 0.75-inch actual size before inserting. Follow the airflow-direction arrow printed on the filter frame and ensure the frame seats flush with no gaps around the perimeter.