Nordic Pure 8x16x1CustomM14+C-6 Merv 14 Carbon Filter

Product Description

The NORDIC PURE 8x16x1CustomM14+C-6 is a custom-cut, pleated MERV 14 air filter with activated carbon media, sized at a nominal 8x16x1 inches with an actual size of 7.5 x 15.5 x 0.75 inches. It is sold in a six-pack. The filter uses electrostatically charged synthetic media combined with a carbon layer to capture a broad range of airborne particulates and neutralize odors in a single pass. MERV 14 filtration captures over 90% of particles between 1 and 10 microns and 75% to 95% of particles in the 0.3 to 1 micron range. Licensed HVAC technicians and knowledgeable homeowners install these filters in residential and light-commercial forced-air systems during routine maintenance intervals.

This filter is designed for residential and light-commercial HVAC applications where indoor air quality demands exceed what a standard MERV 8 or MERV 11 filter can deliver. The carbon layer provides an added layer of odor control suitable for homes with pets, cooking activity, or smoke exposure. Because this is a custom-manufactured size, it is cut to the exact nominal dimensions ordered. Nordic Pure manufactures this filter using a reinforced two-part frame construction, which may incorporate tape depending on the cut size. The recommended replacement interval is every 30 to 90 days depending on indoor and outdoor environmental conditions.

Key Features

• MERV 14 rating captures over 90% of particles from 1 to 10 microns, including pollen, mold spores, pet dander, smoke, bacteria, and fine dust
• Activated carbon layer reduces common household odors from pets, cooking, and smoke
• Electrostatically charged synthetic media improves particle capture without excessive airflow restriction
• Reinforced two-part frame construction provides added structural durability over standard single-frame filters
• Custom-manufactured to nominal 8x16x1 inches; actual size is 7.5 x 15.5 x 0.75 inches
• Made in the USA; sold in a six-pack

Compatibility

Custom-cut replacement filter sized for forced-air furnace and air conditioning systems with a filter slot that accepts a nominal 8x16x1 inch filter. Verify the actual opening dimensions before ordering, as custom sizes are not eligible for return. The actual filter dimensions should fall within 0.125 inches of the opening measurement.

Installation Notes

Filter installation should be performed by a qualified HVAC technician or a knowledgeable property owner. Power down or set the thermostat to the off position before removing the existing filter to prevent unfiltered air from circulating through the blower. Confirm airflow direction arrows on the filter frame are oriented toward the blower, not the return duct. Because this is a custom size, measure the existing filter slot carefully before ordering, as custom-manufactured filters cannot be returned.