Nordic Pure 8x14x1ExactCustomM7+C-12 Merv 7 Carbon Filter

Product Description

The NORDIC PURE 8x14x1ExactCustomM7+C-12 is a custom-cut, pleated AC and furnace air filter rated MERV 7 with an integrated carbon layer. It is built from electrostatically charged synthetic media that attracts and captures airborne particulates on each pass through the system. The carbon layer addresses common household odors in addition to standard particulate capture. At MERV 7, the filter captures 50 to 70 percent of particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores. The actual dimensions are 8 x 14 x 0.75 inches. This filter is custom-made to exact dimensions and is non-returnable. HVAC technicians and homeowners install this filter in forced-air heating and cooling systems.

This filter is suited for residential and light commercial forced-air HVAC systems where a standard nominal size does not fit the filter slot. The nominal size is 8x14x1, with an actual size of 8 x 14 x 0.75 inches. Custom sizing is achieved by cutting down or combining standard filter frames, with tape used as needed for structural integrity. The reinforced 2-part frame is designed to support balanced airflow and consistent filtration performance over the service life of the filter. A replacement interval of 30 to 90 days is recommended, depending on indoor and outdoor air quality conditions.

Key Features

• MERV 7 rating captures 50 to 70 percent of airborne particles between 3 and 10 microns
• Integrated carbon layer reduces common household odors
• Electrostatically charged synthetic media for enhanced particulate capture
• Reinforced 2-part frame for structural durability and consistent airflow support
• Custom exact-cut dimensions to fit non-standard filter slots
• Made in the USA

Compatibility

Designed as a custom exact-size replacement filter for residential and light commercial forced-air HVAC systems requiring a nominal 8x14x1 filter slot where standard sizes do not fit. Verify the actual opening dimensions before ordering, as custom sizes are not eligible for returns.

Installation Notes

This filter is installed by HVAC technicians or qualified service personnel during routine filter maintenance. Power down or set the thermostat to the off position before opening the filter access panel. Confirm the actual slot dimensions with a tape measure before installing a custom-size filter, as the actual filter dimension is 8 x 14 x 0.75 inches. Follow the airflow direction arrow printed on the filter frame when inserting the filter into the cabinet.