Nordic Pure 8x12x1CustomM12+C-6 Merv 12 Plus Carbon Filter

Product Description

The NORDIC PURE 8x12x1CustomM12+C-6 is a custom-cut, MERV 12 Plus Carbon pleated air filter designed for residential and light-commercial AC and furnace systems. Built to actual measured dimensions of 7.5 x 11.5 x 0.75 inches, this filter ships as a 6-pack and is hand-fabricated to the exact size specified at ordering. The MERV 12 rating delivers high-efficiency particle capture across a broad size range, while the integrated carbon layer targets odors and gaseous contaminants. A reinforced two-part frame supports structural integrity and consistent airflow across the filter face. Licensed HVAC technicians and knowledgeable homeowners who need a non-standard filter footprint are the primary installers.

This filter fits residential and light-commercial forced-air HVAC systems where standard nominal sizes do not match the actual filter slot. It is suited for gas furnaces, air handlers, and central AC systems that require a 1-inch depth filter. Because the unit is custom-fabricated by cutting or combining filter frames, the actual size is 7.5 x 11.5 x 0.75 inches, which falls within the standard 1/8-inch tolerance for proper seating. Replacement interval for 1-inch filters is every 30 to 90 days depending on household conditions such as pet dander load, smoke exposure, and outdoor air quality.

Key Features

• MERV 12 rating captures over 90% of particles between 3 and 10 microns and 80% to 90% of particles between 1 and 3 microns, including dust, pollen, pet dander, mold spores, smoke, bacteria, and lint
• Integrated carbon layer reduces common household odors and gaseous airborne contaminants
• Custom-fabricated to exact ordered dimensions with actual size of 7.5 x 11.5 x 0.75 inches
• Reinforced two-part frame construction provides added durability and supports balanced airflow
• Sold as a 6-pack for extended service coverage between purchasing cycles
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light-commercial forced-air furnace and air handler systems requiring a nominal 8x12x1 filter slot. Actual dimensions are 7.5 x 11.5 x 0.75 inches. Verify the actual slot dimensions of your current filter before ordering, as custom sizes are non-returnable.

Installation Notes

Installation is typically performed by a licensed HVAC technician or a qualified homeowner. Always shut down the furnace or air handler at the thermostat and disconnect power at the disconnect switch or breaker before replacing the filter. Confirm airflow direction arrows on the filter frame align with the direction of airflow toward the blower. Because this is a custom-fabricated size, measure the existing filter slot to the nearest 1/8 inch before ordering to ensure proper fit.