Nordic Pure 8x10x1ExactCustomM14+C-6 Merv 14 Plus Carbon Filter

Product Description

The NORDIC PURE 8x10x1ExactCustomM14+C-6 is a custom-cut, pleated MERV 14 plus carbon air filter for residential and light commercial HVAC systems. Each filter measures 8 x 10 x 0.75 inches actual size and is hand-fabricated to those exact dimensions. The MERV 14 rating captures over 90% of airborne particles between 1 and 10 microns, and between 75% and 95% of particles in the 0.3 to 1 micron range. The added carbon layer addresses odors and gaseous contaminants. This pack includes 6 filters. HVAC technicians and service pros specify this filter when a non-standard opening requires an exact-dimension replacement rather than a nominal-size off-the-shelf unit.

This filter is suited for residential forced-air furnace and central air conditioning systems where a custom opening size is present and standard nominal sizes do not fit. It is installed in the return-air slot or filter rack of a gas or electric forced-air system. The reinforced two-part frame supports balanced airflow and maintains structural integrity during the full service interval. For 1-inch thick filters in typical residential environments, a replacement interval of 30 to 90 days is recommended depending on air quality conditions, occupancy, and pet presence.

Key Features

• MERV 14 filtration captures over 90% of particles between 1 and 10 microns, including dust, pollen, mold spores, pet dander, smoke, bacteria, and smog
• Carbon layer reduces odors and gaseous pollutants alongside particulate filtration
• Custom exact-size construction at 8 x 10 x 0.75 inches actual - built to the listed dimensions, not a nominal approximation
• Reinforced two-part filter frame provides added structural durability and supports consistent airflow
• Pack of 6 filters supports multiple replacement cycles without reordering
• Made in the USA

Compatibility

Designed as an exact-dimension custom replacement for residential and light commercial forced-air furnace and AC systems with a filter opening that accepts an 8 x 10 x 0.75 inch actual-size filter. Measure the existing filter opening with a tape measure before ordering. The actual width and length of the installed filter should be within 0.125 inches of the opening dimensions. This is a custom-made, non-returnable item.

Installation Notes

Power down the air handler or furnace at the disconnect or thermostat before removing the old filter. Confirm airflow direction arrows on the filter frame align with the direction of airflow toward the blower. A licensed HVAC technician or qualified service professional should verify that the custom filter seats flush with no bypass gaps around the frame. Custom-cut frames may use tape construction at the edges - do not force the filter into an undersized opening, as this can damage the frame and compromise filtration.