Nordic Pure 8x10x1ExactCustomM10+C-6 Merv 10 Carbon Filter 6pk

Product Description

The NORDIC PURE 8x10x1ExactCustomM10+C-6 is a custom-cut, pleated MERV 10 plus carbon air filter designed for residential and light-commercial AC and furnace systems. Each filter is hand-fabricated to exact dimensions - in this case an actual size of 8 x 10 x 0.75 inches - and ships in a 6-pack. The MERV 10 rating means the media captures over 85 percent of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, lint, and mold spores. The activated carbon layer addresses common household odors. A reinforced 2-part frame supports consistent airflow and structural integrity over the filter's service life. Licensed HVAC technicians and experienced DIYers install these as direct drop-in replacements where standard nominal sizes do not fit the filter slot.

This filter is suited for residential forced-air furnaces and central air conditioning systems where non-standard or fractional filter dimensions are required. Because the filter is fabricated to the exact measurements provided at ordering, it is intended for installations where off-the-shelf nominal sizes leave gaps or require folding to fit. The 6-pack format supports regular change-out intervals; Nordic Pure recommends replacing 1-inch filters every 30 to 90 days depending on household conditions such as pets, dust load, and local air quality. Each unit in the pack is identical at the 8 x 10 x 0.75 inch actual dimension.

Key Features

• MERV 10 filtration captures over 85 percent of particles from 3 to 10 microns, including pollen, pet dander, dust, lint, and mold spores
• Activated carbon layer reduces common household odors
• Custom hand-fabricated to exact dimensions - actual size 8 x 10 x 0.75 inches - for non-standard filter slots
• Reinforced 2-part frame construction provides added durability and balanced airflow support
• Sold as a 6-pack to support the recommended 30-to-90-day replacement cycle
• Made in the USA

Compatibility

Designed for residential and light-commercial forced-air furnaces and central AC systems requiring a custom exact-fit filter with an actual size of 8 x 10 x 0.75 inches. Measure the existing filter slot carefully before ordering; custom sizes are non-returnable.

Installation Notes

Power down the HVAC system at the thermostat and, where applicable, at the disconnect before removing the old filter. Verify the actual opening dimensions with a tape measure - the actual size should match to within 1/8 of an inch - before installing the replacement. Slide the new filter in with the airflow arrow pointing toward the blower. Custom-cut filters are non-returnable, so confirm measurements prior to ordering.