Nordic Pure 8_1/2x30x1ExactCustomM13-6 Merv 13 Filter 6pk

Product Description

The NORDIC PURE 8_1/2x30x1ExactCustomM13-6 is a custom-cut, pleated AC furnace air filter rated MERV 13, sized to exact dimensions of 8.5 x 30 x 0.75 inches. Sold in a 6-pack, it is designed for residential and light commercial HVAC systems where a non-standard filter size is required. The electrostatically charged pleated media captures over 90% of airborne particles between 1 and 10 microns, and 50% to 70% of particles between 0.3 and 1 microns, including dust, pollen, pet dander, mold spores, smoke, bacteria, and virus carriers. The moisture-resistant beverage board frame provides structural rigidity and supports consistent airflow through the filter media.

This filter is intended for use in residential forced-air furnaces, air handlers, and central AC systems that require a custom nominal size of 8.5 x 30 x 1 inch. It is a viable option for HVAC contractors and homeowners who cannot source a standard off-the-shelf filter for their equipment. MERV 13 efficiency is comparable to filters rated MPR 2200 to 2400 on alternative manufacturer scales. Nordic Pure recommends replacing this filter every 1 to 3 months, with more frequent changes in homes with pets or occupants with allergies. The filter media is manufactured in the USA and will not promote bacterial or mold growth on its surface.

Key Features

• MERV 13 rated filtration captures particles as small as 0.3 microns, including smoke, bacteria, and virus carriers
• Electrostatically charged pleated media improves particle attraction without significantly restricting airflow
• Moisture-resistant beverage board frame resists warping and maintains filter shape during operation
• Custom exact-size construction at 8.5 x 30 x 0.75 inches fits non-standard filter openings
• Reinforced 2-part frame design provides added durability for the custom size build
• Made in the USA

Compatibility

Designed as a custom exact-size replacement filter for residential and light commercial forced-air HVAC systems requiring a nominal 8.5 x 30 x 1 inch filter opening. Verify the actual filter slot dimensions before ordering, as custom sizes are non-returnable.

Installation Notes

Always power down the HVAC system at the thermostat and, where applicable, at the disconnect switch before removing or installing an air filter. Confirm airflow direction marked on the filter frame aligns with the system airflow arrow before seating the filter. Because this is a custom-cut product, measure the existing filter slot to the fraction of an inch prior to ordering to ensure correct fit. Replace on a 1-to-3-month schedule, or more frequently in high-use or allergy-sensitive environments, per ASHRAE and equipment manufacturer guidance.