Nordic Pure 6x20x1CustomM10+C-6 Merv 10 Plus Carbon Filter

Product Description

The NORDIC PURE 6x20x1CustomM10+C-6 is a custom-cut, pleated MERV 10 Plus Carbon air filter designed for residential and light commercial HVAC systems. It combines a MERV 10 mechanical filtration layer with an activated carbon layer to capture airborne particles while reducing common household odors. The filter measures 5.5 x 19.5 x 0.75 inches actual size and ships in a 6-pack. HVAC technicians and experienced DIYers order this filter when a standard nominal size does not fit their equipment. Each unit is hand-built to the exact dimensions specified at the time of order, so accurate field measurements are required before purchasing.

This filter is suited for forced-air furnaces and central air conditioning systems where a non-standard opening makes off-the-shelf 1-inch filters impractical. The MERV 10 rating makes it appropriate for residential settings where occupants have concerns about dust, pollen, pet dander, and mold spores, as well as light odor control from the carbon layer. Because the filter is manufactured to order from the dimensions entered at checkout, it is not a stocked item and cannot be returned. Service technicians should verify actual filter opening dimensions with a tape measure before placing the order, as the actual size must fall within 1/8 inch of the opening.

Key Features

• MERV 10 rating captures over 85% of airborne particles between 3 and 10 microns, including dust, lint, pollen, pet dander, and mold spores
• Activated carbon layer adsorbs common household odors, providing a combined mechanical and carbon filtration solution in a single 1-inch filter
• Custom-cut to exact ordered dimensions using 1-, 2-, or 3-frame construction; may include reinforcing tape depending on final size
• Reinforced 2-part frame supports balanced airflow and maintains filter geometry over the service life
• Sold as a 6-pack; recommended replacement interval is every 30 to 90 days depending on environmental conditions
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for any residential or light commercial forced-air furnace or central air conditioning system with a non-standard 1-inch filter opening that matches the nominal 6 x 20 x 1 inch slot. Verify actual opening dimensions before ordering.

Installation Notes

Filter replacement is typically performed by HVAC technicians or qualified DIYers. Set the system thermostat to off and shut off power at the air handler disconnect before removing the old filter. Note the airflow direction arrow on the existing filter and install the replacement in the same orientation. Because this is a custom-made product built to the dimensions entered at order, confirm actual slot measurements with a tape measure prior to ordering - standard field practice is to measure length, width, and depth to the nearest 1/16 inch.