Nordic Pure 6x10x1ExactCustomM14+C-6 Merv 14 Carbon Filter

Product Description

The NORDIC PURE 6x10x1ExactCustomM14+C-6 is a custom-cut, pleated MERV 14 plus carbon air filter for residential and light commercial HVAC systems. Sized at an actual 6 x 10 x 0.75 inches, this filter is hand-made to the exact dimensions specified at the time of order. The MERV 14 rating with an activated carbon layer provides high-efficiency mechanical filtration combined with odor and chemical compound reduction. A reinforced two-part frame supports structural integrity and consistent airflow over the filter life. Each pack contains six filters. Licensed HVAC technicians and knowledgeable homeowners install this filter in furnaces and air handlers where non-standard opening dimensions require a custom size.

This filter fits HVAC applications where the standard nominal sizes do not match the actual filter slot dimensions. Custom sizing is appropriate when the measured width and length of the existing filter cannot be matched within 0.125 inches by any standard off-the-shelf size. Typical installations include residential forced-air furnaces and central air conditioning systems with non-standard filter return grille or air handler openings. The carbon media layer also makes this filter well-suited for environments with elevated odor loads from cooking, pets, or smoke. Replacement interval for 1-inch filters is every 30 to 90 days depending on local air quality and system runtime.

Key Features

• MERV 14 filtration captures over 90% of airborne particles between 1 and 10 microns and 75% to 95% of particles between 0.3 and 1 microns, including dust, pollen, mold spores, bacteria, smoke, and smog
• Activated carbon layer reduces odors and airborne chemical compounds alongside mechanical filtration
• Custom exact-size construction hand-cut to the actual dimensions entered at order - actual size is 6 x 10 x 0.75 inches
• Reinforced two-part frame provides added durability and maintains filter geometry under airflow pressure
• Six filters per pack with a recommended replacement interval of 30 to 90 days for 1-inch depth filters
• Made in the USA

Compatibility

Designed for residential and light commercial forced-air furnaces and air conditioning systems with a filter slot that accepts an exact 6 x 10 x 0.75 inch filter. Before ordering, measure the actual current filter with a tape measure. Order this custom size only if the actual width and length cannot be matched within 0.125 inches by a standard size filter.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified homeowner. Power down the furnace or air handler at the disconnect or thermostat before removing the old filter. Confirm airflow direction marked on the filter frame aligns with the system airflow arrow before inserting. Because this is a custom-made product, verify exact slot dimensions prior to ordering - custom filters are not eligible for return.