Nordic Pure 30x32x1ExactCustomM13-6 Merv 13 Filter 6pk

Product Description

The NORDIC PURE 30x32x1ExactCustomM13-6 is a custom-cut, MERV 13 pleated AC furnace air filter sold in a 6-pack. It is designed to deliver high-efficiency particulate filtration in forced-air HVAC systems, capturing over 90% of airborne particles between 1 and 10 microns, and 50% to 70% of particles between 0.3 and 1 micron. The filter media is electrostatically charged to attract and hold contaminants and is manufactured using a moisture-resistant beverage board frame. The actual size is 30 x 32 x 0.75 inches, making it a true exact-fit replacement. HVAC technicians and knowledgeable installers handling residential or light commercial air handling units are the primary installers of this filter.

This filter is suited for residential and light commercial forced-air systems where superior indoor air quality is a priority. Typical applications include homes with occupants who suffer from allergies or asthma, households with pets, or environments with elevated airborne contaminant loads such as during renovation or construction work. The MERV 13 rating is comparable to MPR 2200 to 2400 filters offered by other manufacturers. Nordic Pure recommends replacing the filter every 1 to 3 months, with more frequent changes in high-pet or high-allergy environments. The reinforced 2-part frame construction provides structural integrity while supporting consistent airflow across the filter face.

Key Features

• MERV 13 efficiency captures over 90% of particles between 1 and 10 microns and 50% to 70% between 0.3 and 1 micron
• Electrostatically charged media attracts lint, dust, pollen, pet dander, mold spores, smoke, bacteria, virus carriers, and smog particles
• Moisture-resistant beverage board frame with reinforced 2-part construction for durability and consistent airflow support
• Custom exact-fit dimensions: actual size 30 x 32 x 0.75 inches - not a nominal approximation
• Made in the USA
• Sold as a 6-pack; non-returnable custom-cut product - measure carefully before ordering

Compatibility

Custom-cut to exact dimensions of 30 x 32 x 0.75 inches for use in forced-air furnace and AC systems requiring an exact nominal 30x32x1 filter slot. Measure your existing filter before ordering, as nominal and actual sizes differ across manufacturers and units.

Installation Notes

Installation is typically performed by HVAC technicians or experienced service personnel. Before replacing the filter, shut down the air handler or furnace at the thermostat and disconnect power at the breaker to prevent debris ingestion during changeout. Confirm airflow direction and install with the arrow on the frame pointing toward the blower. Because this is a custom-cut product, verify actual slot dimensions with a tape measure prior to ordering, as returns are not accepted on custom sizes.