Nordic Pure 29x35x1CustomM8-6 Merv 8 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 29x35x1CustomM8-6 is a custom-cut MERV 8 pleated air filter designed for residential and light-commercial HVAC systems, including central air conditioners and forced-air gas or electric furnaces. Supplied in a six-pack, each filter carries a nominal size of 29x35x1 inches with actual dimensions of 28.5 x 34.5 x 0.75 inches. The electrostatically charged pleated media captures lint, dust, pollen, pet dander, mold spores, and dust mites as air cycles through the system. A moisture-resistant beverage board frame adds structural integrity, and the media is formulated to resist bacterial and mold growth on the filter surface itself. A licensed HVAC technician or experienced installer should verify actual slot dimensions before installation.

This filter is suited for residential homes and small commercial spaces that require reliable particulate control without excessive airflow restriction. MERV 8 efficiency is comparable to MPR 800-rated filters and is rated per ASHRAE standards, capturing 70 to 85 percent of airborne particles in the 3 to 10 micron range. Because these are custom-made to the dimensions listed, they are appropriate for non-standard filter bays that do not accept stock sizes. Recommended change interval is every one to three months under normal conditions; households with pets or allergy sufferers may require more frequent changes. The six-pack format supports a full season of scheduled replacements.

Key Features

• MERV 8 rated per ASHRAE standards, capturing 70 to 85 percent of particles between 3 and 10 microns
• Electrostatically charged pleated media attracts fine airborne particles and resists bacterial and mold growth on the filter
• Moisture-resistant beverage board frame with reinforced two-part construction for added durability
• Actual size 28.5 x 34.5 x 0.75 inches, custom-cut to fit non-standard filter bays
• Maintains low airflow resistance to support HVAC system efficiency and reduce energy draw
• Made in the USA

Compatibility

Custom-cut for filter bays with an actual opening of approximately 28.5 x 34.5 x 0.75 inches. Designed as a replacement for residential and light-commercial HVAC systems that accept a 29x35x1 nominal filter slot. Measure your existing filter slot before ordering, as custom sizes are not eligible for return.

Installation Notes

Installation is typically performed by an HVAC technician or qualified service professional. Power down or set the thermostat to the off position before removing the existing filter to prevent unfiltered air from circulating through the system. Note the airflow direction arrow on the filter frame and orient the new filter so the arrow points toward the blower. Because this is a custom-made product, confirm actual slot dimensions with a tape measure prior to ordering, as returns are not accepted on custom sizes.