Nordic Pure 29x29x1CustomM7+C-6 Merv 7 Carbon Filter 6pk

Product Description

The NORDIC PURE 29x29x1CustomM7+C-6 is a MERV 7 pleated air filter with an activated carbon layer, sized at 29x29x1 nominal (actual size 28.5 x 28.5 x 0.75 inches) and sold in a 6-pack. Built from electrostatically charged synthetic media, it captures airborne particulates in the 3-10 micron range while the carbon layer addresses odors. This is a custom-fabricated filter, cut and assembled to the exact nominal dimensions listed, and is designed for residential and light commercial forced-air HVAC systems. Licensed HVAC technicians and knowledgeable homeowners install this filter as a direct drop-in replacement during routine maintenance.

This filter fits forced-air furnace and air conditioning systems that require a 29x29x1 nominal filter slot. Because it is a custom-made size, it is produced by cutting down or combining standard filter frames, which may include taped seams. The MERV 7 plus carbon rating makes it appropriate for environments where both particulate control and odor reduction are priorities, such as homes with pets or cooking odors. It is not a standard off-the-shelf size, so technicians should verify the actual slot dimensions before ordering.

Key Features

• MERV 7 filtration captures 50-70% of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors passing through the filter media
• Electrostatically charged synthetic media attracts and holds particulates without excessive airflow restriction
• Reinforced 2-part frame construction provides added structural durability for the custom size format
• Custom-fabricated to nominal 29x29x1 dimensions; actual size is 28.5 x 28.5 x 0.75 inches
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light commercial forced-air furnace and air conditioning systems that accept a 29x29x1 nominal filter. Because this is a custom size, technicians should measure the actual filter slot before ordering to confirm the 28.5 x 28.5 x 0.75 inch actual dimensions are the correct fit. Custom sizes are non-returnable.

Installation Notes

This filter is installed by HVAC technicians or qualified service personnel as part of routine filter maintenance. Always set the system thermostat to the off position and confirm the blower has stopped before removing the existing filter. Slide the new filter into the filter rack with the airflow arrow on the frame pointing toward the blower. Nordic Pure recommends replacing this filter every 30 to 90 days depending on indoor and outdoor air quality conditions.