Nordic Pure 28x34x1CustomM8-6 Merv 8 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 28x34x1CustomM8-6 is a MERV 8 pleated AC furnace air filter sold in a 6-pack, custom-made to a nominal size of 28x34x1 inches with an actual size of 27.75 x 33.75 x 0.75 inches. The electrostatically charged filter media captures lint, dust, pollen, pet dander, mold spores, dust mites, and bacteria as air passes through the system. The heavy-duty, moisture-resistant beverage board frame supports the pleated media and resists deformation in both heating and cooling applications. HVAC technicians and HVAC-experienced DIYers who need a custom-dimensioned filter for a non-standard opening will find this filter fits where stock sizes cannot. The media will not promote bacterial or mold growth on the filter surface.

This filter is suited for residential forced-air furnaces, central air conditioning systems, and light commercial air handlers where a non-standard filter opening requires a custom-cut size. The nominal 28x34x1 inch footprint is built to order, meaning the filter is cut down or combined from standard frames and may incorporate tape reinforcement depending on the final dimensions. It is appropriate for homes with pets, allergy sufferers, or environments where moderate-efficiency particle capture is required without excessive static pressure drop. Replacement intervals of 1 to 3 months are typical, with more frequent changes recommended in high-dust or high-occupancy environments.

Key Features

• MERV 8 rated per ASHRAE standards, capturing 70 to 85 percent of airborne particles between 3 and 10 microns
• Electrostatically charged pleated media attracts and holds fine particles without promoting mold or bacterial growth
• Heavy-duty, moisture-resistant beverage board frame for structural integrity in both heating and cooling airflow
• Reinforced 2-part frame construction provides balanced filtration and consistent airflow support over the service life
• Custom-made to the exact nominal dimensions listed; actual size is 27.75 x 33.75 x 0.75 inches
• Made in the USA

Compatibility

Designed as a custom-size replacement filter for residential and light commercial forced-air furnaces and central AC systems with a non-standard filter opening requiring a 28x34x1 inch nominal size. Verify the actual opening dimensions against the actual size of 27.75 x 33.75 x 0.75 inches before ordering. Custom-made filters are not returnable; measure the existing filter or filter slot carefully prior to purchase.

Installation Notes

Filter installation and replacement is typically performed by a licensed HVAC technician or a qualified service professional, though many equipment owners perform routine filter changes themselves. Always shut down the air handler or furnace at the thermostat and disconnect power at the disconnect or breaker before removing the existing filter. Note the airflow direction arrow on the filter frame and orient the replacement filter so the arrow points toward the blower, not toward the return duct. Dispose of the used filter in a sealed bag to contain captured particulate.