Nordic Pure 28x34x1CustomM7+C-6 Merv 7 Plus Carbon Filter

Product Description

The NORDIC PURE 28x34x1CustomM7+C-6 is a custom-made, pleated MERV 7 plus carbon air filter designed for residential and light-commercial HVAC systems, including forced-air furnaces and central air conditioning units. This filter combines a MERV 7 mechanical filtration layer with an activated carbon layer to capture airborne particulates and reduce common household odors. The actual dimensions are 27.75 x 33.75 x 0.75 inches, which is standard for filters listed at a nominal 28x34x1 inch size. Each order includes 6 filters. Installation is handled by HVAC technicians or knowledgeable homeowners familiar with filter changeout procedures.

This filter is suited for residential forced-air heating and cooling systems where non-standard or hard-to-find filter sizes are required. Because the unit is custom-made to the listed dimensions, it is appropriate for installations where standard stock sizes do not fit the filter rack or air handler cabinet. The MERV 7 rating makes it a practical choice for homes with moderate dust loads, pets, or occupants sensitive to pollen and dander. Replacement interval for 1-inch filters is typically every 30 to 90 days depending on environmental conditions.

Key Features

• MERV 7 filtration captures 50 to 70 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer helps reduce common household odors alongside particulate filtration
• Custom-cut to actual dimensions of 27.75 x 33.75 x 0.75 inches for non-standard filter openings
• Reinforced 2-part frame construction provides added structural rigidity and supports consistent airflow over the filter life
• Sold in a 6-pack to support scheduled maintenance intervals
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement filter for residential and light-commercial forced-air furnace and air conditioning systems requiring a nominal 28x34x1 inch filter size. Measure the existing filter opening to the nearest 1/8 inch before ordering, as custom sizes are non-returnable.

Installation Notes

Filter replacement is typically performed by an HVAC technician or qualified service professional. Always shut down the furnace or air handler at the thermostat and the equipment disconnect before removing the old filter. Confirm airflow direction marked on the filter frame matches the direction of airflow through the system before securing the filter in the rack. Because this is a custom-made product, verify the actual opening dimensions carefully prior to ordering.