Nordic Pure 28x32x1CustomM12+C-6 Merv 12 Plus Carbon Filter

Product Description

The NORDIC PURE 28x32x1CustomM12+C-6 is a custom-cut, pleated MERV 12 plus carbon air filter designed for residential and light-commercial HVAC systems, including forced-air furnaces and central air conditioning units. This filter ships as a 6-pack and is hand-fabricated to the exact nominal dimensions of 28x32x1, with an actual size of 27.75 x 31.75 x 0.75 inches. The activated carbon layer targets odors and gaseous contaminants while the MERV 12 filtration media captures fine particulates. Licensed HVAC technicians and knowledgeable homeowners install this filter as a direct drop-in replacement when a non-standard opening requires a custom size.

This filter is suited for residential forced-air systems where standard nominal sizes do not fit the filter cabinet. It is commonly installed in furnace return-air slots, air handler filter racks, and whole-house filtration systems. Because the filter is manufactured to the specific dimensions listed, it is built by cutting down or combining standard filter frames, and tape may be used depending on the final size. NORDIC PURE recommends replacing 1-inch filters every 30 to 90 days depending on environmental conditions such as pets, dust load, and local air quality.

Key Features

• MERV 12 media captures over 90% of airborne particles between 3 and 10 microns and 80% to 90% of particles between 1 and 3 microns, including lint, dust, pollen, pet dander, mold spores, smoke, bacteria, and viruses
• Activated carbon layer reduces common household odors and gaseous contaminants
• Reinforced 2-part frame provides structural durability and supports consistent airflow over the service life
• Custom-made to the exact nominal size of 28x32x1 with an actual size of 27.75 x 31.75 x 0.75 inches
• Sold as a 6-pack, reducing replacement frequency between supply orders
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light-commercial forced-air HVAC systems requiring a 28x32x1 nominal filter opening. Because this is a custom-fabricated size, measure the existing filter opening to the nearest 1/8 inch before ordering to confirm fit. This custom size is not eligible for returns.

Installation Notes

Installation is typically performed by a licensed HVAC technician or a qualified service professional. Power down or set the thermostat to the off position before removing the old filter to prevent unfiltered air from circulating through the air handler. Confirm airflow direction arrows on the filter frame align with the direction of air travel toward the blower. Because this is a 1-inch filter, inspect and replace every 30 to 90 days depending on household conditions such as pet dander load, smoking, or high dust environments.