Nordic Pure 28x30x1CustomM10+C-6 Merv 10 Carbon Filter

Product Description

The NORDIC PURE 28x30x1CustomM10+C-6 is a custom-cut, pleated AC and furnace air filter rated MERV 10 with an integrated carbon layer. It is designed to capture airborne particulates while also adsorbing odors that pass through the filter media. Made from electrostatically charged synthetic material, the filter attracts and holds lint, household dust, pollen, pet dander, mold spores, and particles in the 3-10 micron range at a capture rate above 85%. The carbon component targets common household odors. This filter ships as a 6-pack and is manufactured to exact nominal dimensions of 28x30x1, with an actual size of 27.5 x 29.5 x 0.75 inches. A licensed HVAC technician or knowledgeable DIYer handles installation.

This filter is suited for residential and light-commercial HVAC applications where a standard size is not available and a custom fit is required. It installs in forced-air furnace and air conditioning systems that use a 1-inch filter slot. The custom construction may use a reinforced 2-part frame with tape bonding depending on the cut size, providing structural integrity while maintaining consistent airflow and filtration performance. This filter is a direct fit for systems requiring a 28x30x1 nominal filter size where standard off-the-shelf sizes do not match the existing filter slot.

Key Features

• MERV 10 rating captures over 85% of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, and mold spores
• Integrated carbon layer adsorbs common household odors alongside particulate filtration
• Electrostatically charged synthetic media attracts and holds fine airborne contaminants
• Reinforced 2-part frame construction delivers structural durability while supporting balanced airflow
• Custom-cut to nominal 28x30x1 dimensions with an actual size of 27.5 x 29.5 x 0.75 inches
• Made in the USA

Compatibility

Custom-made to fit HVAC systems requiring a 28x30x1 nominal filter size. Measure your existing filter slot to confirm actual dimensions of 27.5 x 29.5 x 0.75 inches before ordering. Custom sizes are non-returnable; verify fit prior to purchase.

Installation Notes

Installation is performed by a licensed HVAC technician or a qualified DIYer. Power down the furnace or air handler at the disconnect or breaker before removing the existing filter and inserting the new one. Confirm airflow direction arrows on the filter frame align with system airflow before securing the access panel. Nordic Pure recommends replacing this filter every 30 to 90 days depending on indoor and outdoor air quality conditions.