Nordic Pure 25x29x1CustomM8-6 Merv 8 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 25x29x1CustomM8-6 is a custom-made MERV 8 pleated air filter designed for residential and light commercial HVAC systems. Sold in a 6-pack, each filter measures 24.5 x 28.5 x 0.75 inches actual size with a nominal size of 25x29x1. The electrostatically charged filter media captures lint, dust, pollen, pet dander, mold spores, and other common airborne particles. The heavy-duty, moisture-resistant beverage board frame supports the pleated media and promotes consistent airflow. Because this is a custom-fabricated size, the frame may be assembled from cut-down or combined standard frames, potentially with tape reinforcement at joints. A licensed HVAC technician or knowledgeable installer should confirm actual opening dimensions before ordering.

This filter fits HVAC systems requiring a non-standard 25x29x1 nominal filter slot. It is suited for residential forced-air furnaces, central air conditioning systems, and light commercial air handlers where MERV 8 filtration is specified. The MERV 8 rating is equivalent to approximately MPR 800 and is rated according to ASHRAE standards. Nordic Pure recommends replacing this filter every 1 to 3 months under normal conditions. Households with pets or occupants with allergies may require more frequent replacement to maintain indoor air quality and system efficiency.

Key Features

• MERV 8 rating captures 70 to 85 percent of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, and mold spores
• Electrostatically charged pleated media attracts and holds airborne particles without promoting bacterial or mold growth on the filter surface
• Heavy-duty moisture-resistant beverage board frame with reinforced 2-part construction for added durability
• Custom-fabricated to exact 24.5 x 28.5 x 0.75 inch actual dimensions - not a stock size
• Maintains low airflow resistance to support HVAC system efficiency and reduce strain on the blower motor
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement pleated air filter for residential and light commercial forced-air HVAC systems requiring a nominal 25x29x1 filter size with an actual opening of 24.5 x 28.5 x 0.75 inches. Verify actual filter slot dimensions with a tape measure before ordering. Custom sizes are non-returnable.

Installation Notes

Installation is performed by a qualified HVAC technician or experienced service professional. Always shut down the HVAC system at the thermostat and disconnect power at the disconnect switch or breaker before removing the existing filter. Note the airflow direction arrow on the filter frame and orient the replacement filter accordingly. Because this is a custom size, confirm the actual slot dimensions match the filter actual size of 24.5 x 28.5 x 0.75 inches before installation to ensure a proper seal and prevent bypass.