Nordic Pure 25x28x1CustomM10-6 Merv 10 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 25x28x1CustomM10-6 is a custom-cut, MERV 10 pleated air filter designed for residential and light commercial AC and forced-air furnace systems. Rated at MERV 10, this filter captures over 85% of airborne particles in the 3-10 micron range, including lint, dust, pollen, pet dander, mold spores, and smoke particles. The filter media is electrostatically charged to attract and hold fine particulates, and it will not promote bacterial or mold growth on the filter surface. The heavy-duty, moisture-resistant beverage board frame adds structural integrity. This filter is manufactured to a nominal size of 25 x 28 x 1 inches with an actual size of 24.5 x 27.5 x 0.75 inches and is sold in a 6-pack. HVAC technicians, service pros, and knowledgeable homeowners install this filter.

This custom-size filter is suited for residential and commercial HVAC systems where a non-standard filter dimension is required. It fits forced-air furnaces and central air conditioning air handlers that accept a 25 x 28 x 1 inch nominal filter slot. The electrostatically charged pleated media provides a balance of filtration efficiency and low airflow resistance, helping the HVAC system maintain proper static pressure and run efficiently over the filter service life. Nordic Pure recommends replacing this filter every 1 to 3 months, with more frequent changes in households with pets or allergy sufferers.

Key Features

• MERV 10 rating captures over 85% of particles in the 3-10 micron range, including pollen, pet dander, mold spores, dust, and lint
• Electrostatically charged pleated media attracts and retains fine airborne particles without significantly restricting airflow
• Moisture-resistant beverage board frame provides structural durability in typical HVAC airstream conditions
• Reinforced 2-part frame construction supports balanced filtration and consistent performance over the filter life
• Filter media does not promote growth of bacteria or mold on the filter surface
• Made in the USA to custom dimensions; nominal size 25 x 28 x 1 inches, actual size 24.5 x 27.5 x 0.75 inches

Compatibility

Designed as a custom-size OEM-style replacement filter for residential and light commercial forced-air furnace and central AC air handler systems requiring a nominal 25 x 28 x 1 inch filter. Verify the actual opening dimensions of your filter slot against the actual size of 24.5 x 27.5 x 0.75 inches before ordering. Custom sizes are not eligible for return.

Installation Notes

Installation is performed by HVAC technicians or qualified service personnel. Power down the furnace or air handler at the disconnect or thermostat before removing the old filter. Note the airflow direction arrow on the filter frame and orient the replacement filter so the arrow points toward the blower, away from the return air duct. Because this is a custom-made size, measure the actual filter slot dimensions carefully before ordering, as custom filters cannot be returned.