Nordic Pure 24x30x1M14+C-3 Merv 14 Carbon Air Filter 3 Pack

Product Description

The NORDIC PURE 24x30x1M14+C-3 is a MERV 14 pleated air filter with an integrated activated carbon layer, sold in a 3-pack. It uses electrostatically charged, hypoallergenic synthetic media to capture fine airborne particulates while the activated carbon component adsorbs odorous gases and volatile organic compounds (VOCs). The actual filter dimensions are 23.5 inches by 29.5 inches by 0.75 inches, fitting nominal 24x30x1 filter slots. A metal mesh support grid bonded to the pleats adds structural rigidity, and the moisture-resistant beverage board frame resists degradation in humid conditions. Installed by HVAC technicians and knowledgeable DIYers, this filter suits residential and light-commercial forced-air systems rated to handle MERV 14 filtration.

This filter is designed for use in central forced-air heating and cooling systems where both fine particulate removal and odor control are required. At MERV 14, it captures particles down to the size range that includes bacteria, fine dust, mold spores, pet dander, pollen, smoke particles, and dust mite debris. The added activated carbon flat panel targets odorous gases and VOCs that standard pleated filters cannot address. It is particularly well-suited to newer, high-efficiency HVAC systems that already operate at lower static pressure tolerances. Note that HVAC equipment must be rated to handle MERV 14 or higher before this filter is installed, as the higher filtration efficiency increases air flow resistance compared to lower-MERV alternatives.

Key Features

• MERV 14 electrostatically charged synthetic media captures dust, pollen, mold spores, pet dander, smoke, bacteria, and smog particles
• Integrated activated carbon flat panel adsorbs odorous gases and VOCs for combined particulate and odor control
• Hypoallergenic, antimicrobial filter media inhibits growth of bacteria and mold within the filter
• Moisture-resistant beverage board frame with internal metal mesh support grid for structural durability
• MERV 14 rating is equivalent to MPR 2800
• Made in the USA

Compatibility

Designed as a direct-fit replacement for nominal 24x30x1 filter slots in residential and light-commercial forced-air HVAC systems. Actual size is 23.5 inches by 29.5 inches by 0.75 inches. Verify actual filter compartment dimensions before installation, as nominal and actual filter sizes frequently differ across equipment brands and models.

Installation Notes

Power down or set the HVAC system to off at the thermostat before removing the existing filter to prevent unfiltered air circulation during the swap. Confirm the system is rated for MERV 14 or higher before installation, as higher-efficiency filters increase static pressure and can reduce airflow in undersized or older equipment. Install the filter with the airflow arrow on the frame pointing toward the blower. Nordic Pure recommends replacing this filter every 30 to 90 days depending on indoor air quality conditions and usage.