Nordic Pure 24x30x1M14-4 Pleated Air Filter Merv 14

Product Description

The NORDIC PURE 24x30x1M14-4 is a MERV 14 pleated air filter sold in a 4-pack, designed to capture a wide range of airborne contaminants in residential and light commercial HVAC systems. The filter uses electrostatically charged, hypoallergenic, antimicrobial filter media housed in a moisture-resistant beverage board frame. With a nominal size of 24x30x1 inches and an actual size of 23.5 x 29.5 x 0.75 inches, it fits standard filter slots in forced-air furnaces and air handlers. MERV 14 efficiency makes it suitable for environments where occupant health or air quality standards demand high-performance filtration. A licensed HVAC technician or knowledgeable installer should confirm the air handler is rated to support MERV 14 or higher before installation.

This filter is intended for use in residential and commercial HVAC systems rated to handle MERV 14 filtration levels or above, including newer high-efficiency systems designed for HEPA-grade performance. It is well suited for settings where occupants have allergies, asthma, or other respiratory sensitivities, and for commercial applications with elevated indoor air quality requirements. The 4-pack format supports a standard quarterly replacement cycle. Nordic Pure recommends changing filters every 1 to 3 months depending on the specific environment, with more frequent changes in homes with pets or high particulate loads.

Key Features

• MERV 14 filtration captures airborne dust, pollen, mold spores, pet dander, smoke, smog, dust mite debris, and bacteria
• Electrostatically charged, hypoallergenic, and antimicrobial filter media resists bacterial and mold growth on the media surface
• Moisture-resistant beverage board frame maintains structural integrity in high-humidity airstreams
• Actual size 23.5 x 29.5 x 0.75 inches fits nominal 24x30x1 inch filter slots
• MERV 14 rating is equivalent to MPR 2800 on competing manufacturer scales
• Made in the USA

Compatibility

Designed as a direct-fit replacement for nominal 24x30x1 inch filter slots in residential and commercial forced-air furnaces, air handlers, and HVAC systems rated to support MERV 14 filtration or higher. Confirm actual filter cavity dimensions against the actual size of 23.5 x 29.5 x 0.75 inches before installation, as nominal and actual sizes differ across manufacturers.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service professional. Power down the air handler or furnace at the disconnect or breaker before removing the old filter and inserting the new one. Observe the airflow direction arrow printed on the filter frame and orient it toward the blower. Because MERV 14 media creates higher static pressure drop than lower-rated filters, verify that the system fan and ductwork are rated to handle MERV 14 or above before installation to avoid reduced airflow or equipment strain.