Nordic Pure 24x25x1CustomM10-6 Merv 10 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 24x25x1CustomM10-6 is a custom-cut, MERV 10 pleated air filter designed for residential and commercial HVAC systems including central air conditioners and forced-air furnaces. Sold in a 6-pack, each filter measures a nominal 24x25x1 inches with actual dimensions of 23.5 x 24.5 x 0.75 inches. The electrostatically charged filter media captures over 85% of airborne particles in the 3-10 micron range, including lint, dust, pollen, pet dander, and mold spores, while maintaining low airflow resistance. Licensed HVAC technicians and knowledgeable DIYers install this filter as a direct drop-in replacement during routine maintenance cycles.

This filter is suited for residential homes, apartments, and light commercial spaces where improved indoor air quality is a priority. It is particularly effective in environments with pets, allergy sufferers, or elevated dust levels. The MERV 10 rating is comparable to MPR 900-1000 filters used by other manufacturers. Because this is a custom-made size produced by cutting down or combining standard frames, it is manufactured to the exact nominal dimensions entered at order time. Filter replacement every 1 to 3 months is typical, with more frequent changes recommended in high-traffic or high-allergen environments.

Key Features

• MERV 10 rated filtration captures over 85% of particles between 3 and 10 microns, including pollen, mold spores, and pet dander
• Electrostatically charged pleated media attracts airborne particles more effectively than standard fiberglass filters
• Moisture-resistant beverage board frame provides structural rigidity and resists warping in humid air streams
• Reinforced 2-part frame construction supports balanced filtration and consistent airflow over the full service interval
• Filter media does not promote bacterial or mold growth on the filter surface
• Made in the USA

Compatibility

Custom-made to nominal 24x25x1 inch dimensions with actual size 23.5 x 24.5 x 0.75 inches. Designed as a drop-in replacement for residential and commercial forced-air furnace and AC systems that accept a 24x25x1 nominal filter slot. Verify actual filter cavity dimensions before ordering, as custom sizes cannot be returned.

Installation Notes

Filter installation is typically performed by HVAC technicians or qualified DIYers during scheduled maintenance. Always power down the HVAC system at the thermostat and disconnect power at the air handler before replacing the filter. Confirm airflow direction arrows on the filter frame align with the direction of airflow into the blower. Because this is a custom-manufactured product, measure the actual filter slot dimensions carefully before ordering, as the filter cannot be returned once produced.