Nordic Pure 22x30x1CustomM13+C-6 Merv 13 Plus Carbon Filter

Product Description

The NORDIC PURE 22x30x1CustomM13+C-6 is a custom-cut MERV 13 pleated air filter with an activated carbon layer, sized at a nominal 22x30x1 inches with an actual size of 21.5 x 29.5 x 0.75 inches. This filter is hand-made to exact dimensions and sold in a 6-pack. It is designed for residential and light commercial forced-air HVAC systems, including gas furnaces and central air conditioning units. Licensed HVAC technicians and knowledgeable homeowners install this filter in the return-air filter slot. The MERV 13 rating captures over 90 percent of airborne particles between 1 and 10 microns, while the carbon layer addresses odors and VOCs in the airstream.

This filter suits residential forced-air systems where a standard nominal size does not match the actual filter opening. It is intended for installations where the measured filter slot falls outside standard sizing tolerances. The 6-pack format supports scheduled preventive maintenance programs. Typical service life for a 1-inch filter is 30 to 90 days depending on indoor air quality, system runtime, and environmental conditions such as pets, construction dust, or high-traffic occupancy. This filter is custom-manufactured to the nominal dimensions entered at the time of order and is not returnable once produced.

Key Features

• MERV 13 rating captures over 90 percent of particles 1-10 microns in size, including pollen, pet dander, mold spores, smoke, bacteria, and virus-carrying droplets
• Activated carbon layer reduces common household odors and airborne VOCs in addition to particulate filtration
• Custom actual size of 21.5 x 29.5 x 0.75 inches hand-cut to fit non-standard return-air openings
• Reinforced 2-part frame construction for added structural rigidity and consistent pleat spacing during operation
• Sold as a 6-pack to support a full seasonal maintenance cycle on a 30-to-90-day change interval
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement filter for residential and light commercial forced-air furnace and central air conditioning systems with a return-air filter slot requiring a nominal 22x30x1 inch filter. Verify actual slot dimensions before ordering; custom sizes are non-returnable.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service professional. Before replacing the filter, set the thermostat to off and confirm the air handler blower has stopped. Note the airflow direction arrow printed on the filter frame and orient it toward the blower, not the return duct. Because this is a custom size, measure the actual filter opening to the nearest 1/8 inch before ordering to ensure proper fit.