Nordic Pure 22x29x1CustomM8-6 Merv 8 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 22x29x1CustomM8-6 is a custom-made MERV 8 pleated air filter designed for residential and light commercial HVAC systems, including forced-air furnaces and central air conditioning units. Sold in a 6-pack, each filter measures an actual 21.75 x 28.75 x 0.75 inches. The electrostatically charged filter media captures lint, dust, pollen, pet dander, mold spores, and other airborne particles sized 3 to 10 microns at an efficiency rate of 70 to 85 percent. The beverage board frame is moisture resistant and heavy duty, providing structural support throughout the filter service life. Licensed HVAC technicians and knowledgeable installers rely on this filter for consistent indoor air quality performance without restricting system airflow.

This filter is suited for residential homes and commercial office environments using standard forced-air HVAC equipment. The MERV 8 rating is comparable to MPR 800 on manufacturer-proprietary scales and follows the ASHRAE industry standard for filter efficiency measurement. These are custom-cut filters built to the exact nominal size of 22x29x1. Because of their custom construction, which may involve cutting down or combining standard filter frames and the use of tape, they are intended for installations where a standard stock size does not fit the equipment. Change interval is typically every 1 to 3 months, with more frequent replacement recommended in homes with pets or occupants with allergies.

Key Features

• MERV 8 rated filtration captures 70 to 85 percent of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, and mold spores
• Electrostatically charged filter media attracts and holds unwanted particles without promoting bacterial or mold growth on the media surface
• Heavy duty, moisture resistant beverage board frame with reinforced 2-part construction for added durability and consistent airflow support
• Custom-cut to the exact nominal size of 22x29x1 with an actual size of 21.75 x 28.75 x 0.75 inches
• Pack of 6 filters supports multiple replacement cycles from a single order
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light commercial forced-air furnace and central AC systems requiring a nominal 22x29x1 filter size. Verify the actual opening dimensions of the filter cabinet before ordering, as custom sizes are non-returnable.

Installation Notes

Installation is performed by HVAC technicians or qualified service personnel. Power down or set the thermostat to the off position before removing the existing filter to prevent unfiltered air from circulating through the system. Confirm airflow direction arrows on the filter frame align with the direction of airflow in the cabinet before seating the filter. Because these are custom-cut filters, measure the actual filter slot dimensions carefully prior to ordering, as returns are not accepted on custom sizes.