Nordic Pure 22x22x1CustomM10+C-6 Merv 10 Carbon Filter

Product Description

The NORDIC PURE 22x22x1CustomM10+C-6 is a custom-cut, pleated AC and furnace air filter rated MERV 10 with activated carbon media. It is designed for residential and light commercial HVAC systems where both particulate capture and odor reduction are priorities. The filter uses electrostatically charged synthetic media to attract and trap airborne particulates, while the carbon layer addresses common household odors. The nominal size is 22x22x1, with an actual size of 21.5 x 21.5 x 0.75 inches. This is a custom-made product built to order, and it is installed by HVAC technicians or knowledgeable homeowners as part of routine filter maintenance.

This filter fits HVAC systems requiring a 22x22x1 nominal filter slot where a standard size is not available. It is suited for residential forced-air heating and cooling systems, including gas furnaces and central air conditioning units. The MERV 10 rating makes it appropriate for households with pets, allergy concerns, or elevated dust loads. Because this is a custom size, it is cut down or constructed from standard filter frames, which may include tape reinforcement. Installers should measure the existing filter slot carefully before ordering, as this product is non-returnable once manufactured.

Key Features

• MERV 10 rating captures over 85% of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors passing through the filter media
• Electrostatically charged synthetic pleated media improves particle capture without significantly restricting airflow
• Reinforced 2-part frame construction provides added durability for the custom cut size
• Custom-made to exact nominal dimensions of 22x22x1; actual size is 21.5 x 21.5 x 0.75 inches
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement filter for residential and light commercial forced-air HVAC systems requiring a 22x22x1 nominal filter size. This is a non-standard custom size; verify the actual filter slot dimensions before ordering.

Installation Notes

Power down or set the HVAC system to off before removing the existing filter to prevent unfiltered air from circulating during the swap. Confirm airflow direction arrow on the filter frame aligns with the direction of air movement toward the blower. Because this is a custom-sized filter, measure the actual filter slot opening to confirm the 21.5 x 21.5 x 0.75 inch actual size is correct before installing. Replace every 30 to 90 days depending on environmental conditions, pet presence, and system runtime.