Nordic Pure 20x25x1PolyGreen-3 Merv 6 Air Filter 3-pack

Product Description

The NORDIC PURE 20x25x1PolyGreen-3 is a MERV 6 rated poly green air filter sold in a 3-pack for residential and light commercial HVAC applications. Each filter has an actual size of 19.5 x 24.5 x 0.75 inches, fitting standard 20x25x1 filter slots. The polyester green media captures dust, pollen, and common airborne particulates while allowing adequate airflow through the system. Manufactured in the USA, this filter is built from environmentally responsible materials aimed at reducing waste and environmental impact without sacrificing basic filtration performance. Licensed HVAC technicians and knowledgeable DIYers can install these as part of routine preventive maintenance on forced-air systems.

These filters are suited for residential and light commercial forced-air HVAC systems using a standard 20x25x1 filter rack or return-air grille. The MERV 6 rating makes them appropriate for systems where basic particulate control is the primary goal, such as protecting blower components and coils from dust accumulation. Three filters per box supports a multi-change maintenance schedule, reducing the frequency of reorder. The poly green media construction is an alternative to fiberglass throwaway filters for those prioritizing more sustainable material choices.

Key Features

• MERV 6 filtration captures dust, lint, pollen, and coarse airborne particles
• Actual size 19.5 x 24.5 x 0.75 inches for accurate fit in 20x25x1 nominal filter openings
• Poly green media made from environmentally responsible materials
• 3-pack quantity supports a multi-replacement maintenance cycle
• Manufactured in the USA

Compatibility

Designed as an OEM-style replacement filter for residential and light commercial forced-air HVAC systems with a nominal 20x25x1 filter slot.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified DIYer during routine filter maintenance. Power down or set the thermostat to the off position before opening the filter access panel or return-air grille. Confirm airflow direction arrow on the filter frame aligns with system airflow toward the blower. Inspect and replace on the schedule recommended by the equipment manufacturer, typically every 30 to 90 days depending on occupancy and air quality conditions.