Nordic Pure 19x35_5/8x1CustomM8-6 Merv 8 Furnace Filter 6 Pack

Product Description

The NORDIC PURE 19x35_5/8x1CustomM8-6 is a custom-cut, MERV 8 rated pleated air filter designed for residential and light commercial AC and forced-air furnace systems. Rated at MERV 8, it captures 70 to 85 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores. The filter media is electrostatically charged to attract and hold unwanted particles, and it will not promote the growth of bacteria or mold on the filter surface. The heavy-duty, moisture-resistant beverage board frame provides structural integrity through the full service life of the filter. This listing ships as a 6-pack with an actual size of 19 x 35.5 x 0.75 inches.

This filter is suited for residential homes and commercial spaces where a standard-sized filter does not fit the return-air grille or air handler cabinet. The custom dimensions make it appropriate for non-standard or retrofit filter slots where off-the-shelf sizes are unavailable. Because it is custom-made to exact dimensions, it is manufactured by cutting down or combining standard filter frames, which may involve the use of tape to achieve the specified size. HVAC technicians and homeowners installing filters in units with irregular or non-standard filter tracks will find this a practical solution. Nordic Pure recommends replacing the filter every 1 to 3 months, or more frequently in homes with pets or occupants with allergies.

Key Features

• MERV 8 filtration captures 70 to 85 percent of particles between 3 and 10 microns, including pollen, pet dander, dust, lint, and mold spores
• Electrostatically charged media attracts airborne particles and maintains low airflow resistance to support HVAC system efficiency
• Moisture-resistant beverage board frame with reinforced 2-part construction for added durability and consistent dimensional stability
• Custom-made to exact nominal size 19x35_5/8x1 with an actual size of 19 x 35.5 x 0.75 inches
• Made in the USA
• Ships as a 6-pack

Compatibility

Designed as a custom OEM-style replacement pleated furnace and AC air filter for residential and commercial forced-air HVAC systems requiring a non-standard filter size with a nominal dimension of 19x35_5/8x1 and an actual size of 19 x 35.5 x 0.75 inches.

Installation Notes

Filter installation is typically performed by an HVAC technician or a knowledgeable homeowner. Before installation, power down or set the thermostat to the off position to stop airflow through the system. Verify the actual slot dimensions with a tape measure before ordering, as this is a custom non-returnable product. Install the filter with the airflow arrow on the frame pointing toward the blower or air handler, and confirm the filter seats flush in the track with no bypass gaps around the edges.