Nordic Pure 19x22x1ExactCustomM8+C-6 Merv 8 Filter 6pk

Product Description

The NORDIC PURE 19x22x1ExactCustomM8+C-6 is a custom-cut, pleated AC and furnace air filter rated MERV 8 with an activated carbon layer, sized to an exact nominal 19x22x1 with an actual dimension of 19 x 22 x 0.75 inches. It uses electrostatically charged synthetic filter media to capture airborne particulates including lint, household dust, pollen, dust mites, pet dander, mold spores, and baking flour, while the carbon layer helps adsorb odors. The reinforced two-part frame adds structural durability without restricting airflow. This filter is manufactured in the USA and sold in a six-pack. Licensed HVAC technicians and knowledgeable homeowners install this filter in forced-air residential and light commercial HVAC systems.

This filter is intended for residential and light commercial forced-air heating and cooling systems where a non-standard filter opening requires a custom-cut size. The exact 19x22x1 nominal footprint suits return-air grilles or filter cabinets that do not accept standard off-the-shelf sizes. Because this is a custom-fabricated product, the filter may be constructed by cutting down or combining standard filter frames, and tape may be used in assembly. Nordic Pure recommends replacing the filter every 30 to 90 days depending on indoor and outdoor air quality conditions.

Key Features

• MERV 8 rating captures 70 to 85 percent of airborne particles between 3 and 10 microns, including dust, pollen, pet dander, and mold spores
• Activated carbon layer adsorbs common household odors for improved indoor air quality
• Electrostatically charged synthetic media attracts and holds fine particulates without excessive airflow restriction
• Reinforced two-part frame provides added durability compared to single-frame constructions
• Exact custom sizing with an actual dimension of 19 x 22 x 0.75 inches to fit non-standard filter openings
• Made in the USA; sold as a six-pack

Compatibility

Designed as a custom-size OEM-style replacement filter for residential and light commercial forced-air HVAC systems requiring an exact nominal 19x22x1 filter. Measure the actual opening before ordering, as this item is non-returnable due to its custom-fabricated nature.

Installation Notes

Installation is performed by a licensed HVAC technician or a knowledgeable building owner. Set the thermostat to the off position and confirm the air handler has stopped before opening the filter cabinet. Confirm the actual filter slot dimensions with a tape measure before installation, as the actual size of 19 x 22 x 0.75 inches must seat fully within the track with no more than 0.125 inches of gap on any side. Dispose of the used filter in accordance with local waste guidelines.