Nordic Pure 19x21_1/2x1ExactCustomM14+C-6 Merv 14 Filter

Product Description

The NORDIC PURE 19x21_1/2x1ExactCustomM14+C-6 is a custom-cut, pleated MERV 14 plus activated carbon air filter designed for residential and light commercial HVAC systems. It measures 19 x 21.5 x 0.75 inches actual size and ships as a 6-pack. The MERV 14 filtration media captures over 90 percent of airborne particles between 1 and 10 microns, and between 75 and 95 percent of particles in the 0.3 to 1 micron range. The activated carbon layer adds odor-reduction capability. A reinforced two-part frame provides structural support and consistent airflow. Licensed HVAC technicians and knowledgeable DIYers install this filter in forced-air furnace and air conditioning systems.

This filter is built to exact dimensions entered at time of order, making it the right choice when no standard nominal size fits the filter slot. Typical applications include residential gas furnaces, central air handlers, and split-system HVAC equipment where the filter track requires a non-standard width or length. Because each unit is hand-cut to the exact size ordered, it suits retrofit installations and older equipment with non-standard filter cavities. Nordic Pure recommends replacing 1-inch thick filters every 30 to 90 days depending on household air quality, pet dander load, and regional particulate levels.

Key Features

• MERV 14 media captures over 90 percent of particles from 1 to 10 microns, including pollen, mold spores, pet dander, smoke, bacteria, and smog
• Activated carbon layer reduces common household odors without added chemicals
• Custom exact-dimension construction - cut to the actual size specified at order, not a nominal approximation
• Reinforced two-part frame delivers added rigidity and balanced airflow across the filter face
• Actual size 19 x 21.5 x 0.75 inches - measure existing filter before ordering; custom sizes are non-returnable
• Made in the USA

Compatibility

Designed as a custom exact-size replacement filter for residential and light commercial forced-air furnaces and air handlers requiring a non-standard filter slot dimension. Measure the actual installed filter before ordering to confirm fit.

Installation Notes

Power down the HVAC system at the thermostat or disconnect before replacing the filter. Confirm airflow direction marked on the filter frame aligns with the direction of airflow in the unit before seating the filter. Because this is a custom-cut size, verify all three dimensions against the existing filter to within 0.125 inches before ordering, as custom-made filters cannot be returned. Replacement is a standard maintenance task performed by HVAC technicians and qualified DIYers with no specialized tools required.