Nordic Pure 19x19x1ExactCustomM7+C-12 Merv 7 Filter 12pk

Product Description

The NORDIC PURE 19x19x1ExactCustomM7+C-12 is a custom-cut, pleated AC and furnace air filter rated MERV 7 with activated carbon media. It is designed for residential and light commercial HVAC systems where the filter slot requires a non-standard opening that standard stocked sizes cannot fill. The filter media is electrostatically charged synthetic material that captures airborne particulates while the carbon layer addresses common household odors. Sold in a 12-pack, it delivers MERV 7 filtration efficiency across captures in the 3-10 micron particle range, making it appropriate for general residential air quality maintenance. Licensed HVAC technicians and knowledgeable homeowners alike handle installation.

This filter is suited for residential forced-air heating and cooling systems, including gas furnaces, electric air handlers, and central AC systems, where the return-air grille or filter rack measures exactly 19 x 19 x 3/4 inches actual. Because this is a custom-fabricated size, it is manufactured to the exact nominal dimension of 19 x 19 x 1 inches with an actual size of 19 x 19 x 0.75 inches. Custom filters in this line are built by cutting down or combining standard filter frames and may include tape reinforcement at the seams. The reinforced two-part frame supports consistent airflow and structural integrity over the service interval. Filter replacement every 30 to 90 days is recommended depending on indoor and outdoor environmental conditions.

Key Features

• MERV 7 rating captures 50 to 70 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors passing through the filter media
• Electrostatically charged synthetic pleat material attracts and holds particulates without blocking airflow
• Exact custom nominal size of 19 x 19 x 1 inches with actual dimensions of 19 x 19 x 0.75 inches for precise fit in non-standard filter slots
• Reinforced two-part frame construction provides added durability compared to single-frame designs
• Made in the USA; sold in a 12-pack for extended supply

Compatibility

Designed as a custom OEM-style replacement for residential and light commercial forced-air HVAC systems requiring a filter with a nominal size of 19 x 19 x 1 inches and an actual size of 19 x 19 x 0.75 inches. Verify the actual opening dimensions of your filter rack or return grille before ordering, as this is a non-returnable custom-made product.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service person. Always power down the air handler or furnace at the disconnect or breaker before replacing the filter. Confirm airflow direction marked on the filter frame matches the direction of airflow in the system before seating the filter. Because this is a custom size, measure the actual filter slot opening to within 1/8 inch before ordering, as custom filters are not eligible for return.