Nordic Pure 19x19x1ExactCustomM13-6 Merv 13 Filter 6 Pack

Product Description

The NORDIC PURE 19x19x1ExactCustomM13-6 is a custom-cut, MERV 13 pleated air filter designed for residential and light commercial HVAC systems, including forced-air furnaces and central air conditioners. Rated MERV 13, this filter captures over 90% of airborne particles between 1 and 10 microns, and 50% to 70% of particles between 0.3 and 1 micron. The filter uses an electrostatically charged pleated media housed in a moisture-resistant beverage board frame. It ships as a 6-pack and is hand-cut to exact dimensions, making it a direct fit for non-standard filter openings that nominal-size filters cannot serve.

This filter is suited for residential homes, offices, and light commercial spaces where improved indoor air quality is a priority. It targets lint, dust, pollen, pet dander, mold spores, smoke particles, bacteria, virus carriers, and smog. The MERV 13 efficiency rating is comparable to MPR 2200 to 2400 filters used by other manufacturers. Licensed HVAC technicians and knowledgeable homeowners install this filter as part of routine preventive maintenance. Nordic Pure recommends replacement every 1 to 3 months, with more frequent changes in homes with pets or occupants with allergies. The actual size is 19 inches by 19 inches by 0.75 inches, which differs from the nominal 19x19x1 designation printed on the frame.

Key Features

• MERV 13 rated filtration captures over 90% of particles between 1 and 10 microns, including pollen, mold spores, pet dander, smoke, bacteria, and virus carriers
• Electrostatically charged pleated media attracts and holds fine airborne particles without promoting mold or bacterial growth on the filter surface
• Moisture-resistant beverage board frame with reinforced 2-part construction provides added durability and maintains frame integrity in humid air streams
• Custom-cut to exact dimensions for non-standard filter openings where nominal-size filters do not fit correctly
• Low airflow resistance design helps HVAC systems maintain efficiency and reduces strain on the blower motor
• Made in the USA

Compatibility

Designed as a custom exact-fit replacement for residential and light commercial forced-air furnace and central AC filter applications requiring a 19 inch by 19 inch by 0.75 inch actual-size filter slot. Verify actual opening dimensions before ordering, as this custom size is not eligible for return.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified service personnel. Always shut down the furnace or air handler at the thermostat and disconnect power at the unit disconnect or breaker before removing the existing filter. Confirm the airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a custom-cut size, measure the actual filter slot opening to the nearest fraction of an inch before ordering to ensure a proper seal and avoid bypass leakage.