Nordic Pure 19_1/2x31x1ExactCustomM14+C-6 Merv 14 Carbon Filter

Product Description

The NORDIC PURE 19_1/2x31x1ExactCustomM14+C-6 is a custom-cut, pleated MERV 14 plus carbon air filter sized to exact dimensions for residential and light commercial HVAC systems. Manufactured to an actual size of 19.5 x 31 x 0.75 inches, this filter is hand-built to the fraction of an inch and sold in a six-pack. The MERV 14 rating means it captures over 90 percent of airborne particles between 1 and 10 microns, and between 75 and 95 percent of particles from 0.3 to 1 micron. The added carbon layer addresses odors from smoke, cooking, and similar sources. Licensed HVAC technicians and knowledgeable DIYers install this filter in forced-air furnace and air conditioning systems where a non-standard filter cavity requires a custom fit.

This filter is designed for forced-air HVAC applications where standard nominal sizes do not fit the filter housing. The custom exact-size format means the actual dimensions are manufactured to match the measurements entered at the time of order. Because this is a custom-made product, buyers must measure their existing filter or filter slot precisely before ordering. The nominal size is 19.5 x 31 x 1 inch, with an actual size of 19.5 x 31 x 0.75 inches. The filter is appropriate for residential and small commercial applications where higher filtration efficiency and odor reduction are both required. Recommended replacement interval for 1-inch filters is every 30 to 90 days depending on the environment and system use.

Key Features

• MERV 14 filtration captures over 90 percent of particles between 1 and 10 microns, including pollen, pet dander, mold spores, smoke, bacteria, and smog
• Carbon layer reduces airborne odors from smoke, cooking, and similar household sources
• Custom exact-size construction hand-cut to the fraction of an inch for non-standard filter openings
• Reinforced two-part frame provides structural support and balanced airflow across the filter face
• Sold as a six-pack, providing a multi-month supply at a single order
• Made in the USA

Compatibility

Designed as a custom exact-size replacement filter for residential and light commercial forced-air furnace and air conditioning systems with a filter slot measuring 19.5 x 31 x 0.75 inches actual. Verify the actual dimensions of your existing filter or filter slot before ordering, as custom sizes cannot be returned.

Installation Notes

Installation is performed by a licensed HVAC technician or a knowledgeable DIYer. Power down the furnace or air handler at the disconnect or thermostat before removing the existing filter. Insert the new filter with the airflow arrow on the frame pointing toward the blower. Measure the filter slot carefully before ordering this custom size, as custom-made filters are not eligible for return.