Nordic Pure 19_1/2x22x1ExactCustomM8+C-6 Merv 8 Filter 6pk

Product Description

The NORDIC PURE 19_1/2x22x1ExactCustomM8+C-6 is a custom-cut, pleated air filter with activated carbon media rated at MERV 8. It is designed for use in residential and light-commercial HVAC systems - specifically forced-air furnaces and central air conditioning systems that require a non-standard filter size. The actual dimensions are 19.5 inches by 22 inches by 0.75 inches, hand-fabricated to those exact measurements. This six-pack ships as a single unit. MERV 8 filtration captures 70 to 85 percent of airborne particles between 3 and 10 microns, and the carbon layer targets common household odors. Licensed HVAC technicians and experienced DIYers install this filter in systems where no standard catalog size fits.

This filter is built for forced-air systems - gas furnaces, electric air handlers, and split-system air conditioners - that require a custom nominal size of 19.5 inches by 22 inches by 1 inch. Because it is cut and assembled to exact dimensions, it is particularly suited to older construction, retrofit installations, or any application where standard off-the-shelf sizes do not seat properly in the filter rack. The recommended service interval for 1-inch filters is every 30 to 90 days, depending on household conditions such as pets, dust load, and regional air quality. The six-pack format supports routine scheduled maintenance without repeated reorders.

Key Features

• MERV 8 rating captures 70 to 85 percent of particles in the 3 to 10 micron range, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors alongside standard particulate filtration
• Custom-fabricated to exact dimensions of 19.5 inches by 22 inches by 0.75 inches - built to fit non-standard filter openings
• Reinforced two-part frame construction supports balanced airflow and structural integrity over the full service interval
• Six filters per box to support a full season or more of scheduled filter changes
• Made in the USA

Compatibility

Designed for forced-air furnaces and central air conditioning systems requiring a custom filter size with a nominal dimension of 19.5 inches by 22 inches by 1 inch. Measure the existing filter opening to the nearest 0.125 inches before ordering, as this is a non-returnable custom-made product.

Installation Notes

Filter replacement is a standard HVAC maintenance task performed by licensed technicians or qualified building owners. Always shut down the air handler or furnace at the system disconnect or thermostat before removing the existing filter. Confirm airflow direction arrows on the filter frame align with the direction of airflow toward the blower. Because this is a custom-sized filter built to exact dimensions, verify the measured opening size matches the 19.5 by 22 by 0.75 inch actual size before installation.