Nordic Pure 19_1/2x21x1ExactCustomM7+C-6 Furnace Filter

Product Description

The NORDIC PURE 19_1/2x21x1ExactCustomM7+C-6 is a custom-cut, pleated MERV 7 plus carbon air filter designed for residential AC and furnace systems. Built to exact dimensions of 19.5 inches by 21 inches by 0.75 inches actual size, this filter combines mechanical particle capture with an activated carbon layer to address both airborne particulates and common household odors. It ships as a 6-pack and is manufactured to the specific nominal size entered at the time of order. Licensed HVAC technicians and experienced DIYers install this filter in forced-air systems where a non-standard opening requires a custom-fit solution rather than a stock size.

This filter is intended for residential forced-air heating and cooling systems with non-standard filter openings. The nominal size of 19.5 inches by 21 inches by 1 inch fits applications where standard catalog sizes do not match the actual filter slot. MERV 7 filtration captures particles in the 3 to 10 micron range, making it suitable for households dealing with lint, dust, pollen, pet dander, and mold spores. The added carbon media layer targets odors that mechanical filtration alone does not address. Replacement interval is typically every 30 to 90 days for 1-inch filters, depending on environmental conditions.

Key Features

• Custom-cut to exact dimensions: 19.5 inches by 21 inches by 0.75 inches actual size
• MERV 7 rating captures 50 to 70 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors that pass through standard mechanical media
• Reinforced 2-part frame construction supports balanced filtration and consistent airflow over the service life
• Made in the USA
• Sold as a 6-pack

Compatibility

Designed as a custom OEM-style replacement for residential forced-air AC and furnace systems requiring a non-standard filter size of 19.5 inches by 21 inches by 0.75 inches actual. Verify actual slot dimensions with a tape measure before ordering, as custom-made filters are not eligible for return.

Installation Notes

Installation is performed by a licensed HVAC technician or a knowledgeable service professional. Power down the air handler or furnace at the disconnect or breaker before removing the old filter. Confirm the actual measured dimensions of the filter slot match the ordered size to within 1/8 inch before installing. Because this is a custom-cut product, measure the existing filter or the slot directly rather than relying on a previously ordered size.