Nordic Pure 18x18x1PM10C-3 Pleated Carbon Filter Merv 10

Product Description

The NORDIC PURE 18x18x1PM10C-3 is a pleated plus carbon HVAC air filter rated MERV 10, sold in a pack of three. It uses a dual-layer media construction that fuses a MERV-rated pleated material with an activated carbon layer. This design reduces flow restriction while providing 33% more surface area compared to standard single-layer pleats. The activated carbon layer captures odorous gases and volatile organic compounds (VOCs), while the electrostatically charged pleated media traps airborne particulates. Licensed HVAC technicians and HVAC-knowledgeable homeowners install this filter in residential forced-air furnace and air handler systems as a direct drop-in replacement for standard 1-inch filters.

This filter is suited for residential and light commercial forced-air heating and cooling systems where both particulate filtration and odor control are required. It is particularly effective in homes with pets, smokers, or occupants sensitive to allergens or VOCs. The MERV 10 rating makes it appropriate for systems that can support moderate-efficiency filtration without excessive static pressure drop. The nominal size is 18x18x1 with an actual size of 17.75 x 17.75 x 0.75 inches, which is the measurement to confirm against the filter slot before ordering. NORDIC PURE rates this filter as equivalent to MPR 1000.

Key Features

• Dual-layer media: MERV 10 pleated material fused with activated carbon for combined particulate and odor control
• Electrostatically charged media acts as a passive magnet to attract and retain airborne dust and particulates
• Antimicrobial, hypoallergenic filter media resists bacteria and mold growth within the filter
• Heavy-duty moisture-resistant beverage board frame with metal mesh support grid bonded to pleats
• MERV 10 rating captures lint, household dust, pollen, smoke particles, dust mites, pet dander, virus carriers, mold spores, and similar contaminants
• Made in the USA; pack of 3 filters

Compatibility

Designed as a direct replacement for standard 1-inch pleated air filters in residential and light commercial forced-air furnace and air handler systems with a nominal filter slot size of 18x18x1. Verify the actual slot dimensions against the actual size of 17.75 x 17.75 x 0.75 inches before installation.

Installation Notes

Always power down the furnace or air handler at the disconnect or thermostat before replacing the filter. Note the airflow direction arrow printed on the filter frame and orient it to match the direction of air moving toward the blower. Nordic Pure recommends replacing this filter every 30 to 90 days depending on indoor air quality conditions, with more frequent changes during home renovation or periods of high particulate activity. Confirm the actual slot dimensions with a tape measure before installation, as nominal filter sizes commonly differ from actual dimensions.