Nordic Pure 17x26x1ExactCustomM7+C-6 Merv 7 Carbon Filter 6pk

Product Description

The NORDIC PURE 17x26x1ExactCustomM7+C-6 is a custom-cut, pleated carbon air filter rated MERV 7, sold in a 6-pack with an actual size of 17 x 26 x 0.75 inches. It is designed for use in residential and light-commercial HVAC systems, including gas furnaces and central air conditioning air handlers. The activated carbon layer addresses common household odors while the pleated media captures airborne particulates in the 3-10 micron range. Each filter is hand-fabricated to the exact dimensions listed, so the nominal size matches the ordered measurement rather than an industry-standard nominal. Licensed HVAC technicians and knowledgeable homeowners install this filter when a non-standard filter bay requires a custom fit.

This filter is suited for residential forced-air systems with non-standard filter slots where off-the-shelf nominal sizes do not seat correctly. The exact actual size of 17 x 26 x 0.75 inches means the filter should be measured to within 1/8 inch before ordering. Because these filters are hand-made to order, they are not returnable. Replacement is recommended every 30 to 90 days for 1-inch filters, depending on household conditions such as pets, dust load, and local air quality. The 6-pack quantity supports a full seasonal replacement schedule.

Key Features

• MERV 7 rating captures 50-70% of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores
• Activated carbon layer reduces common household odors carried through the HVAC airstream
• Custom exact-cut construction fabricated to the dimensions entered at order - actual size 17 x 26 x 0.75 inches
• Reinforced 2-part frame provides added structural durability while maintaining balanced airflow resistance
• Sold as a 6-pack to cover multiple replacement intervals
• Made in the USA

Compatibility

Designed as a custom exact-size replacement filter for residential and light-commercial forced-air furnace and AC systems with a filter bay requiring an actual opening of 17 x 26 x 0.75 inches. Measure the existing filter bay before ordering, as this item is non-returnable once produced.

Installation Notes

Power down or set the HVAC system to the off position at the thermostat before removing the existing filter. Confirm the actual filter slot dimensions with a tape measure to within 1/8 inch before installation, as custom-cut filters cannot be returned. Insert the new filter with the airflow arrow pointing toward the blower. Replace every 30 to 90 days under normal residential conditions, or more frequently in high-dust or high-pet-dander environments.