Nordic Pure 17x22x1CustomM8+C-6 Merv 8 Carbon Filter

Product Description

The NORDIC PURE 17x22x1CustomM8+C-6 is a custom-cut, pleated AC and furnace air filter rated MERV 8 with activated carbon media. It is designed to capture airborne particulates while also reducing common household odors. The filter uses electrostatically charged synthetic media to trap lint, dust, pollen, pet dander, mold spores, and similar contaminants as air circulates through a residential or light-commercial HVAC system. The actual dimensions are 16.5 inches by 21.5 inches by 0.75 inches. This listing is for a box of 6 filters. HVAC technicians and facilities maintenance staff are the typical installers.

This filter is intended for use in standard forced-air heating and cooling systems where the nominal filter slot measures 17 by 22 by 1 inch. Because this is a custom-fabricated size, it is built by cutting down or combining standard filter frames, and tape may be used in construction depending on the exact dimensions. It suits residential homes and small commercial spaces where low airflow resistance and allergen reduction are both priorities. Replace every 30 to 90 days depending on indoor air quality conditions and system runtime.

Key Features

• MERV 8 rating captures 70 to 85 percent of airborne particles between 3 and 10 microns, including lint, dust, pollen, and pet dander
• Activated carbon layer helps reduce common household odors passing through the filter media
• Electrostatically charged synthetic media attracts and holds fine particulates without significantly restricting airflow
• Reinforced 2-part frame construction provides added structural durability for consistent performance over the filter life
• Custom-fabricated to 16.5 inches by 21.5 inches by 0.75 inches actual size for a precise fit
• Made in the USA

Compatibility

Custom-fabricated as a direct replacement for residential and light-commercial forced-air HVAC systems requiring a nominal 17x22x1 inch filter. Verify the actual slot dimensions of your filter housing before ordering, as custom sizes are not eligible for returns.

Installation Notes

Always shut down the HVAC system at the thermostat or disconnect before removing or installing the filter. Confirm airflow direction and orient the filter so the arrow on the frame points toward the blower. Because this is a custom size, measure the existing filter or the filter slot carefully before ordering. Replace the filter every 30 to 90 days or more frequently in high-dust or high-occupancy environments.