Nordic Pure 17x19x1ExactCustomM10-6 Merv 10 Air Filter 6 Pack

Product Description

The NORDIC PURE 17x19x1ExactCustomM10-6 is a custom-made pleated AC and furnace air filter rated MERV 10, sold in a 6-pack. It is designed to capture over 85% of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores. The filter media is electrostatically charged to attract unwanted particles and will not promote bacterial or mold growth on the filter surface. The frame is constructed from a heavy-duty, moisture-resistant beverage board. Nominal size is 17x19x1 with an actual size of 17 x 19 x 0.75 inches. Licensed HVAC technicians and knowledgeable DIYers install this filter in residential and light commercial forced-air systems.

This filter is suited for residential and commercial HVAC applications where improved indoor air quality is a priority. It is a strong choice for households with pets, allergy sufferers, or environments with elevated airborne particulate loads such as renovation sites. The MERV 10 rating is comparable to MPR 900-1000 filters used by other manufacturers. Because this is a custom-made product cut to exact dimensions, it is intended for installations where standard nominal sizes do not fit the filter housing correctly. Nordic Pure recommends replacing the filter every 1 to 3 months, with more frequent changes in high-particulate environments.

Key Features

• MERV 10 rated - captures over 85% of particles between 3 and 10 microns, including pollen, pet dander, mold spores, and dust
• Electrostatically charged pleated media for enhanced particle attraction and low airflow resistance
• Heavy-duty, moisture-resistant beverage board frame with reinforced 2-part construction for added durability
• Custom-cut to exact dimensions listed - actual size 17 x 19 x 0.75 inches matches tight-tolerance housings
• Media will not promote the growth of bacteria or mold on the filter surface
• Made in the USA

Compatibility

Designed as a custom exact-fit replacement for residential and commercial forced-air furnace and AC systems with a filter opening requiring a nominal 17x19x1 inch filter. Actual installed dimensions are 17 x 19 x 0.75 inches. Measure the existing filter or housing opening before ordering, as this product is custom-made and not eligible for return.

Installation Notes

This filter is installed by HVAC technicians or knowledgeable DIYers servicing residential or light commercial forced-air systems. Power down or set the thermostat to off before removing the existing filter to prevent unfiltered air from circulating through the blower. Note the airflow direction arrow on the filter frame and orient it toward the blower. Because this is a custom size, confirm actual opening dimensions with a tape measure before ordering - measure the short side (width) and long side (height) independently to the nearest fraction of an inch.