Nordic Pure 17x17x1ExactCustomM14+C-6 Merv 14 Filter 6pk

Product Description

The NORDIC PURE 17x17x1ExactCustomM14+C-6 is a custom-cut, pleated AC and furnace air filter rated MERV 14 with an activated carbon layer, sized to an exact 17 x 17 x 0.75 inches actual dimension. It uses electrostatically charged synthetic filter media to capture over 90% of airborne particles between 1 and 10 microns, and 75% to 95% of particles between 0.3 and 1 microns. The carbon layer addresses odors alongside fine particulate capture. This filter is sold in a six-pack and is installed by HVAC technicians or knowledgeable service professionals in residential or light-commercial forced-air systems where a non-standard filter size is required.

This filter is intended for applications where a standard nominal size does not fit the filter slot. The exact 17 x 17 x 0.75 inch actual size is custom-fabricated to fit that specific opening without gaps that would allow unfiltered air to bypass the media. It is suited for residential gas furnaces, heat pumps, and central air conditioning air handlers. Targeted contaminants include lint, household dust, pollen, dust mites, pet dander, mold spores, smoke, bacteria, and smog particles. The added carbon layer provides supplemental odor control beyond what pleated media alone delivers. Filter replacement is recommended every 30 to 90 days depending on environmental conditions.

Key Features

• MERV 14 filtration captures over 90% of particles between 1 and 10 microns and 75% to 95% of particles between 0.3 and 1 microns
• Activated carbon layer provides odor reduction alongside particulate filtration
• Electrostatically charged synthetic media attracts and holds fine airborne contaminants
• Reinforced 2-part frame construction for added durability and consistent seal in the filter slot
• Exact custom dimensions of 17 x 17 x 0.75 inches actual size - fabricated for non-standard filter openings
• Made in the USA; sold as a six-pack

Compatibility

Custom-fabricated as an exact-fit replacement for forced-air HVAC systems with a filter opening that requires a 17 x 17 x 0.75 inch actual-size filter. This is a non-returnable custom-made product; measure the existing filter or filter slot before ordering to confirm the actual dimensions match.

Installation Notes

Power down or set the thermostat to off before removing the existing filter to prevent unfiltered air from circulating through the air handler during the swap. Verify airflow direction arrows on the filter frame align with the direction of airflow toward the blower before seating the filter. Because this is a custom exact-size filter, it is fabricated to fit snugly without trimming; do not force or bend the frame. Follow local ASHRAE and IFGC guidelines for filter maintenance intervals, and inspect the filter more frequently in high-dust or high-occupancy environments.