Nordic Pure 17x17x1ExactCustomM13-6 Merv 13 Filter 6 Pack

Product Description

The NORDIC PURE 17x17x1ExactCustomM13-6 is a custom-cut, pleated AC furnace air filter rated MERV 13, sold in a 6-pack. It is designed for residential and light commercial HVAC systems where high-efficiency particle capture is required. The filter media is electrostatically charged to attract airborne contaminants and is manufactured using a moisture-resistant beverage board frame. At MERV 13, it captures over 90% of particles between 1 and 10 microns and 50% to 70% of particles between 0.3 and 1 micron, including dust, pollen, pet dander, mold spores, smoke, bacteria, and virus carriers. Licensed HVAC technicians and knowledgeable installers specify this rating for improved indoor air quality without significant restriction to system airflow.

This filter is built to exact nominal dimensions of 17 x 17 x 1 inches with an actual size of 17 x 17 x 0.75 inches. It is suited for residential gas furnaces, heat pumps, and central air conditioning air handlers where a 1-inch filter slot is present. The custom construction may involve cutting down or combining filter frames, and tape may be used depending on the final dimensions. This filter ships as a non-returnable, hand-made unit produced to the dimensions specified at order. Nordic Pure recommends replacing filters every 1 to 3 months, with more frequent changes recommended in homes with pets or occupants with allergy sensitivities.

Key Features

• MERV 13 rated - captures over 90% of particles 1 to 10 microns and 50% to 70% of particles 0.3 to 1 micron
• Electrostatically charged media attracts lint, dust, pollen, pet dander, mold spores, smoke, bacteria, and virus carriers
• Moisture-resistant beverage board frame with reinforced 2-part construction for added durability
• Media does not promote bacterial or mold growth on the filter surface
• Custom-cut to exact dimensions - actual size 17 x 17 x 0.75 inches
• Made in the USA

Compatibility

Designed as a custom OEM-style replacement for residential and light commercial HVAC systems requiring a 17 x 17 x 1 inch nominal filter slot. Actual installed size is 17 x 17 x 0.75 inches. Measure the existing filter before ordering to confirm fitment, as nominal and actual sizes differ on most air conditioning and furnace filters.

Installation Notes

Installation is performed by licensed HVAC technicians or qualified service personnel. Power down or set the thermostat to the off position before removing the existing filter to prevent unfiltered air from circulating through the air handler. Confirm airflow direction arrow on the filter frame aligns with the direction of airflow toward the blower. Because this is a custom-made product cut to exact dimensions, verify measurements with a tape measure before ordering - returns are not accepted on custom sizes.