Nordic Pure 16x28x1ExactCustomM10+C-6 Merv 10 Carbon Filter

Product Description

The NORDIC PURE 16x28x1ExactCustomM10+C-6 is a custom-cut, pleated MERV 10 plus carbon air filter for residential and light-commercial HVAC systems. It ships in a six-pack and is hand-manufactured to the exact dimensions entered at the time of order, with a nominal size of 16x28x1 and an actual size of 16 x 28 x 0.75 inches. The integrated carbon layer targets odors alongside standard particulate capture. MERV 10 filtration intercepts over 85 percent of airborne particles in the 3-10 micron range, including pollen, pet dander, mold spores, and household dust, while keeping static pressure low enough to support normal airflow through the air handler or furnace. Licensed HVAC technicians and knowledgeable service professionals install this filter as a direct drop-in replacement where a 16x28x1 nominal slot exists.

This filter is sized for forced-air furnace and central air conditioning systems that require a non-standard 16x28x1 slot. Because the filter is built to exact submitted dimensions, it is appropriate for systems where standard stock sizes do not fit flush. The reinforced two-part frame supports structural integrity during the full service interval. Nordic Pure recommends replacing 1-inch filters every 30 to 90 days depending on indoor air quality conditions, pet presence, and local dust levels. The carbon media layer makes this filter particularly well-suited to environments where cooking odors, pet odors, or light VOC exposure is a recurring concern.

Key Features

• MERV 10 filtration captures over 85 percent of particles between 3 and 10 microns, including lint, dust, pollen, pet dander, mold spores, and odors
• Activated carbon layer reduces common household and pet odors without restricting airflow
• Custom exact-size construction to the nominal dimension of 16x28x1 with an actual size of 16 x 28 x 0.75 inches
• Reinforced two-part frame provides added structural durability over single-frame designs
• Comes in a six-pack for extended service stocking
• Made in the USA

Compatibility

Designed as a custom exact-size replacement for forced-air furnace and central AC systems requiring a 16x28x1 nominal filter slot. Because this is a custom-made size, measure the existing filter opening to the nearest 1/8 inch before ordering to confirm fitment. Standard stock sizes should be ruled out before ordering a custom size.

Installation Notes

Installation is performed by a licensed HVAC technician or qualified service professional. Set the thermostat to the off position and shut down the air handler or furnace at the disconnect before removing the existing filter. Confirm airflow direction arrows on the filter frame align with the direction of airflow toward the blower. Because this product is custom-made to submitted dimensions and is non-returnable, verify the actual opening measurement to within 1/8 inch before placing the order.