Nordic Pure 16x26x1ExactCustomM10-6 Merv 10 Filter 6 Pack

Product Description

The NORDIC PURE 16x26x1ExactCustomM10-6 is a custom-cut pleated MERV 10 air filter designed for residential and light commercial HVAC systems, including forced-air furnaces and central air conditioning units. Rated at MERV 10, this filter captures over 85% of airborne particles between 3 and 10 microns, including lint, dust, pollen, pet dander, and mold spores. The electrostatically charged filter media attracts and holds fine particulates without promoting bacterial or mold growth on the media itself. The nominal size is 16 x 26 x 1 inches with an actual size of 16 x 26 x 0.75 inches. Sold as a 6-pack, this listing is a custom-made product cut to exact dimensions.

This filter is suited for residential homes, apartments, and office environments where improved indoor air quality is a priority. It is particularly appropriate for households with pets, allergy sufferers, or occupants sensitive to airborne particulates. MERV 10 efficiency is comparable to filters rated MPR 900-1000 on proprietary scales used by other manufacturers. Nordic Pure follows the ASHRAE-standard MERV rating system, which evaluates filtration efficiency on a consistent set of criteria across all brands. The filter is constructed with a heavy-duty, moisture-resistant beverage board frame. Depending on the custom size, the frame may incorporate tape-joined sections to achieve exact dimensions. Nordic Pure recommends replacing this filter every 1 to 3 months, with more frequent changes recommended for homes with pets or allergy concerns.

Key Features

• MERV 10 rated - captures over 85% of particles between 3 and 10 microns, including pollen, dust, pet dander, and mold spores
• Electrostatically charged media attracts airborne particulates and does not promote mold or bacterial growth on the filter surface
• Reinforced 2-part frame construction built for durability and consistent airflow support over the filter life
• Moisture-resistant beverage board frame maintains structural integrity in typical HVAC duct environments
• Custom-cut to exact nominal dimensions of 16 x 26 x 1 inches; actual size is 16 x 26 x 0.75 inches
• Made in the USA

Compatibility

Designed as an exact-fit custom replacement for residential and commercial HVAC systems requiring a 16 x 26 x 1 inch nominal filter slot with an actual opening of 16 x 26 x 0.75 inches. Measure the existing filter or filter slot before ordering - custom sizes are non-returnable.

Installation Notes

Installation is typically performed by the homeowner, facility manager, or HVAC technician as part of routine preventive maintenance. Power down or set the thermostat to the off position before removing the existing filter. Note the airflow direction arrow printed on the filter frame and orient the replacement filter so the arrow points toward the blower. Because this is a custom-made filter, verify exact slot dimensions with a tape measure before ordering, as custom sizes cannot be returned or exchanged.