Nordic Pure 16x25x1M10MiniPleat-3 Merv 10 Mini Pleat Filter

Product Description

The NORDIC PURE 16x25x1M10MiniPleat-3 is a MERV 10 mini pleat air filter sold in a 3-pack, designed for use in residential and light commercial HVAC systems including forced-air furnaces and central air conditioners. The filter uses self-supporting polyester media engineered with 2.5 times more pleats than standard 1-inch filters, increasing surface area for particle capture while keeping static pressure low. The moisture-resistant beverage board frame holds its shape in high-humidity ductwork. Actual dimensions are 15.5 x 24.5 x 0.75 inches, which fits standard 16x25x1 nominal filter slots. Licensed HVAC technicians and qualified service professionals install this filter type.

This filter is suited for residential homes and commercial buildings relying on standard 1-inch filter racks in forced-air HVAC systems. The MERV 10 rating targets common airborne contaminants including lint, dust, pollen, pet dander, dust mites, and mold spores. It is equivalent to an MPR 800-1000 rating. Nordic Pure recommends replacing the filter every 2 to 3 months depending on occupancy, pet activity, and environmental conditions such as renovation or construction work. The 3-pack format supports a full seasonal replacement cycle without repeat ordering.

Key Features

• MERV 10 rating captures lint, dust, pollen, pet dander, dust mites, and mold spores
• 2.5 times more pleats than standard filters for increased surface area and particle capture
• Actual size 15.5 x 24.5 x 0.75 inches for precise fit in 16x25x1 nominal slots
• Moisture-resistant beverage board frame resists warping and deformation in ductwork
• Self-supporting polyester media resists mold growth without restricting airflow
• Manufactured in the USA

Compatibility

Designed as an OEM-style replacement filter for residential and light commercial forced-air HVAC systems using a standard 16x25x1 nominal filter slot. Always verify the actual filter opening dimensions against the actual size of 15.5 x 24.5 x 0.75 inches before installation, as nominal and actual sizes differ across equipment manufacturers.

Installation Notes

Power down the HVAC system at the thermostat or disconnect before replacing the filter. Note the airflow direction arrow printed on the filter frame and orient it toward the blower, away from the return air duct. Inspect the filter rack and surrounding duct seams for gaps that could allow unfiltered air to bypass the media. Replace every 2 to 3 months or more frequently in high-dust or high-occupancy environments.