Nordic Pure 16x24x4PCP-1 Carbon Pleated Filter Merv 8

Product Description

The NORDIC PURE 16x24x4PCP-1 is a pleated carbon air filter rated at MERV 8, designed for odor reduction and particulate capture in residential and light commercial HVAC systems. The filter media consists of a non-woven polyester base infused with naturally derived charcoal, which adsorbs odors and Volatile Organic Compounds (VOCs) as air passes through. A metal mesh support grid is bonded directly to the pleats for structural rigidity, and the frame is constructed from a heavy-duty, moisture-resistant beverage board. The nominal size is 16x24x4 inches, with an actual size of 15.38 x 23.38 x 3.63 inches. Licensed HVAC technicians and knowledgeable DIYers install this filter as a primary or pre-filter stage.

This filter suits residential settings including apartments and homes where pet dander, smoke, cooking odors, mold spores, pollen, and dust mites are ongoing concerns. It also serves as a pre-filter in higher-efficiency commercial HVAC units where strong odor loads are present upstream of a primary filtration stage. The pleated design provides approximately three times the carbon media surface area compared to flat-panel carbon filters, improving odor absorption without significantly restricting airflow. Replacement is recommended every 30 to 90 days depending on odor load, with more frequent changes advised during renovation or high-dust activities.

Key Features

• MERV 8 efficiency rating captures pollen, pet dander, dust mites, and similar airborne particles
• Non-woven polyester media infused with naturally derived charcoal for VOC and odor adsorption
• Pleated design delivers approximately three times the carbon media of flat-panel alternatives
• Metal mesh support grid bonded to pleats provides structural stability under airflow
• Heavy-duty, moisture-resistant beverage board frame
• Made in the USA

Compatibility

Designed for residential forced-air furnace and air conditioning systems accepting a 16x24x4 nominal filter, and compatible for use as a pre-filter in higher-efficiency commercial HVAC units requiring odor control upstream of primary filtration.

Installation Notes

Shut down the HVAC system at the thermostat before removing the existing filter. Confirm the actual slot dimensions in your filter cabinet against the actual size of 15.38 x 23.38 x 3.63 inches before installation, as nominal sizing can differ from slot dimensions. Note the airflow direction arrow on the filter frame and orient accordingly. This filter is installed by licensed HVAC technicians or qualified building maintenance personnel; follow local mechanical codes when servicing commercial systems.