Nordic Pure 16x24x1M14+C-2 Merv 14 Plus Carbon Filter 2pk

Product Description

The NORDIC PURE 16x24x1M14+C-2 is a pleated MERV 14 air filter with an integrated activated carbon layer, sold in a 2-pack. The electrostatically charged synthetic filter media captures fine airborne particulates while the activated carbon panel adsorbs odorous gases and volatile organic compounds (VOCs). The nominal size is 16 x 24 x 1 inches with an actual size of 15.5 x 23.5 x 0.75 inches. Designed for residential and light commercial HVAC systems, this filter is installed by HVAC technicians and knowledgeable homeowners performing routine maintenance on forced-air heating and cooling equipment.

This filter targets a broad range of airborne contaminants including household dust, pollen, mold spores, pet dander, smoke particles, dust mite debris, smog, and bacteria. The activated carbon component simultaneously addresses odor control, making it well suited for households with pets, smokers, or sensitivities to VOCs and chemical vapors. MERV 14 Plus Carbon filters are equivalent to an MPR rating of 2800. Because of the higher filtration efficiency and associated airflow restriction, the HVAC system must be rated to handle MERV 14 or higher filters. These filters perform well in newer high-efficiency systems designed to accommodate dense filter media.

Key Features

• MERV 14 filtration captures dust, pollen, mold spores, pet dander, smoke, bacteria, and dust mite debris
• Activated carbon layer adsorbs VOCs, odors, and chemical vapors without sacrificing airflow
• Hypoallergenic, antimicrobial, and electrostatically charged synthetic filter media
• Heavy-duty moisture-resistant beverage board frame with metal mesh support grid bonded to pleats
• Equivalent to MPR 2800 rated filters
• Made in the USA

Compatibility

Designed as a standard 16 x 24 x 1 inch nominal replacement filter for residential and light commercial forced-air HVAC systems rated to accept MERV 14 or higher filter media. Verify actual filter slot dimensions against the actual size of 15.5 x 23.5 x 0.75 inches before installation.

Installation Notes

HVAC technicians or qualified service personnel should power down the air handler or furnace at the disconnect or thermostat before replacing the filter. Confirm airflow direction and align the filter so the arrow on the frame points toward the blower. Filters in this MERV range should be inspected and replaced every 30 to 90 days depending on indoor air quality conditions and system run time. Systems not rated for MERV 14 or higher should not use this filter without first verifying static pressure tolerances with the equipment manufacturer.